Material: Co-Polyester Elastomer. The profile damper TA are
maintenance-free, self-contained damping elements. Due to the degressive
damping characteristics it provides a very high energy absorption at the
beginning of the stroke. The excellent temperature characteristic of the
material provides consistent damping performance over a temperature
range of -40°C to +90°C. The low installed weight, the economic price
and the long operating life of up to 1 million cycles makes this an
attractive alternative to hydraulic end position damping, if the moving
mass does not need to stop in an exact datum position and it is not
necessary to absorb 100% of the incoming energy. The life cycle is up to
20 times longer than for urethene dampers and up to ten times longer
than for rubber springs. Environment: Resistant to oil, grease
seawater and to microbe or chemical attack. Excellent UV and ozone
resistance. Material does not absorb water or swell. Dynamic Force
Range: 870 N to 90,000 N. Temperature Range: -40°C to +90°C. Energy
Absorption: 58% to 73%. Material Hardness: Shore 55D. Mounting:
in any position. Impact Velocity range: up to max. 5 m/s Mounting
Bolt Torque: M3: 1 Nm. M4: 2 Nm. M5: 4 Nm. M6: 6 Nm. M8: 20 Nm. M12:
50 Nm. M16: 120 Nm. On request: special strokes, characteristics, spring
rates, sizes and materials. Download
Energy Stroke Characteristics 1. 6 MB

¹⁾ Max. energy capacity per cycle for continuous use. ²⁾ For
a single cycle, e. g. an emergency stop.