| Part number (SKU) | 63199940 |
| Material | Stainless steel (304) / Bearings of steel |
| Surface | Blank |
| Bore [d1H7] | 20 [mm] |
| Outer diameter [d2] | 40 [mm] |
| Retracted length [l3 min.] | 290 [mm] |
| Extended length [l3 max.] | 360 [mm] |
| Max. torque at 250 min-1 | 134 [Nm] |
| Max. torque at 500 min-1 | 115 [Nm] |
| Max. torque at 1,000 min-1 | 96 [Nm] |
| Max. torque at 2,000 min-1 | 77 [Nm] |
| Max. torque at 3,000 min-1 | 67 [Nm] |
| Max. torque at 3,600 min-1 | 62 [Nm] |
| Weight | 2.08 [kg] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 2.08 kg |
|---|---|
| Dimensions | 290 × 40 × 40 cm |
| Material | |
| Surface | |
| Bore | |
| Outer diameter | |
| Retracted length | |
| Extended length | |
| Max. torque at 250 min-1 | |
| Max. torque at 500 min-1 | |
| Max. torque at 1,000 min-1 | |
| Max. torque at 2,000 min-1 | |
| Max. torque at 3,000 min-1 | |
| Max. torque at 3,600 min-1 | |
| Weight |
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 20H7 on both sides min. length 290mm max. length 360mm PN: 63199940
Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6.
The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request.
Optionally without or with keyway DIN 6885-1, on both sides.
$469.03
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $469.03 |
| 10 - 24 | 1.67 % | $461.21 |
| 25 - 49 | 8.16 % | $430.77 |
| 50+ | 14.5 % | $401.04 |
