Maedler North America

Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

15

Showing 1–20 of 79 results

  • Clamping Plate Work Pieces for Timing Belts, without boreholesTiming Belts and Pulleys

    Clamping plate workpiece without bores material aluminium for timing belt T10 plate dimension: length 230mm x width 60mm PN: 16489900L

     $85.80 Add to cart
  • Clamping Plate Work Pieces for Timing Belts, without boreholesTiming Belts and Pulleys

    Clamping plate workpiece without bores material aluminium for timing belt T10 plate dimension: length 230mm x width 125mm PN: 16499901L

     $153.15 Add to cart
  • Clamping Plate Work Pieces for Timing Belts, without boreholesTiming Belts and Pulleys

    Clamping plate workpiece without bores material aluminium for timing belt AT10 plate dimension: length 230mm x width 60mm PN: 16889900L

     $85.74 Add to cart
  • Clamping Plate Work Pieces for Timing Belts, without boreholesTiming Belts and Pulleys

    Clamping plate workpiece without bores material aluminium for timing belt AT10 plate dimension: length 230mm x width 125mm PN: 16889901L

     $153.25 Add to cart
  • Clamping Plate Work Pieces for Timing Belts, without boreholesTiming Belts and Pulleys

    Clamping plate workpiece without bores material aluminium for timing belt 8M plate dimension: length 226mm x width 55mm PN: 17539900L

     $77.26 Add to cart
  • Clamping Plate Work Pieces for Timing Belts, without boreholesTiming Belts and Pulleys

    Clamping plate workpiece without bores material aluminium for timing belt 8M plate dimension: length 226mm x width 110mm PN: 17579900L

     $137.25 Add to cart
  • DIN103 - Trapezoidal Spindles and Nuts, single thread, right handRound Trapezoidal Nut, single thread, right hand, steel, short versionTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Round trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 15mm outer diameter 22mm PN: 64301000

     $9.03 Add to cart
  • DIN103 - Trapezoidal Spindles and Nuts, single thread, right handHexagonal Trapezoidal Nut, single thread, right hand, steelTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Hexagonal trapezoidal nut steel C35Pb Tr.10 x 3 single-start right length 15mm wrench size 17mm PN: 64311000

     $8.37 Add to cart
  • DIN103 - Trapezoidal Spindles and Nuts, single thread, left handRound Trapezoidal Nut, single thread, left hand, steel, short versionTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Round trapezoidal nut C35Pb Tr.10 x 3 single-start left length 15mm outer diameter 22mm PN: 64351000

     $14.61 Add to cart
  • DIN103 - Trapezoidal Spindles and Nuts, single thread, left handHexagonal Trapezoidal Nut, single thread, left hand, steelTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Hexagonal trapezoidal nut steel C35Pb Tr.10 x 3 single-start left length 15mm wrench size 17mm PN: 64361000

     $17.50 Add to cart
  • Machine Mounts, Rubber-Buffers, DampersThrust Pad with Spring Retainer, DIN 6311 and Factory Standard

    Thrust pad DIN 6311 diameter 32mm with snap ring DIN 9045 PN: 65411600

     $4.58 Add to cart
  • Machine Mounts, Rubber-Buffers, DampersThrust Pad with Spring Retainer, DIN 6311 and Factory Standard, Stainless steel

    Thrust pad DIN 6311 stainless steel 1.4301 (AISI 304) diameter 32mm with snap ring DIN 9045 PN: 65499116

     $6.00 Add to cart
  • Conical Seats DIN 6319 Type D, PTFE coatedFastening ElementsSpherical Washers / Conical Seats DIN 6319

    conical seat DIN6319 form D PTFE-coated inner-Ø 42mm outer-Ø 68mm PN: 65598536

     $12.01 Add to cart
  • Conical Seats DIN 6319 Type D, Stainless Steel 1.4301Fastening ElementsSpherical Washers / Conical Seats DIN 6319

    Conical seat DIN 6319 form D outer diameter 68mm stainless steel 1.4301 PN: 65599536

     $15.66 Add to cart
  • Ball KnobsBall Knobs DIN 319 PF Version E, Plastic, with Internal ThreadParts for Operating

    Ball knob DIN 319 version E duroplast PF 31 with threaded bush from brass diameter 16mm M4 PN: 66411600

     $1.45 Add to cart
  • Ball KnobsBall Knobs DIN 319 Version C, SteelParts for Operating

    Ball knob DIN 319 version C steel polished diameter 16mm thread M4 PN: 66441600

     $9.15 Add to cart
  • Ball KnobsBall Knobs DIN 319 from Rubber NBR, Version E, with ThreadParts for Operating

    Ball knob ähnlich DIN 319 version E rubber NBR with threaded bush from steel diameter 16mm M4 PN: 66451604

     $2.74 Add to cart
  • Ball KnobsBall Knobs DIN 319 Version C, AluminiumParts for Operating

    Ball knob DIN 319 version C aluminium polished diameter 16mm thread M4 PN: 66466416

     $8.61 Add to cart
  • Ball KnobsBall Knobs DIN 319 PA Version C, Plastic, with Internal ThreadParts for Operating

    Ball knob DIN 319 version C thermoplast PA6GV with compression-moulded thread diameter 16mm M4 PN: 66471604

     $0.82 Add to cart
  • Ball KnobsBall Knobs DIN 319 PA Version C, Plastic, with Internal ThreadParts for Operating

    Ball knob DIN 319 version C thermoplast PA6GV with compression-moulded thread diameter 16mm M5 PN: 66471605

     $0.82 Add to cart

Maedler North America is your perfect partner for everything that revolves around drive-train technology. With an inventory of over  35,000 parts, we’re confident that you’ll find what you are looking for.

We Are Here To Assist You

contact us today

Copyright © MaedlerNorthAmerica | Powered by MaedlerNorthAmerica.com