| Part number (SKU) | 62376800 |
| Material | Plastic (up to 80°C, surface pressure 18 N/mm²) |
| Surface | Blank |
| Inner diameter [d1] | 50 [mm] |
| Minus allowance d1 | +0.3 [mm] |
| Plus allowance d1 | +0.43 [mm] |
| Outer diameter [d2] | 56 [mm] |
| Allowance d2 | +0.22 [mm] |
| Length [b1] | 50 [mm] |
| Weight | 43 [g] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
Bush BP bore 50mm polyamide 6.6 outer diameter 56mm length 50mm PN: 62376800
Material: Thermoplastic polyamide 6.6, die cast. Color: natural.Polyamide is very well suited for the manufacture of plain bearings due to its good sliding characteristics and strong wear resistance even at dry-running conditions and because of its sufficient mechanical strength and excellent corrosion resistance.
Surface pressure max.:
18 N/mm², dependant on sliding speed and bearing temperature
Sliding Speed:2 m/s
Lubrication: usually not required
Bearing clearance: about 0.01 mm per mm shaft-Ø
Bearing temperature: Should not exceed 80°C. With thin-walled parts, the frictional heat is dissipated extremely well.
Coefficient of linear expansion: 8 x 10^-5
Moisture absorption max.: 7.5%
Moisture absorption at 20°C and 50% rel. humidity: 2.4%
Mounting hole: tolerance H7
$5.13
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $5.13 |
| 10 - 24 | 8.58 % | $4.69 |
| 25 - 49 | 16.96 % | $4.26 |
| 50+ | 30.41 % | $3.57 |
