| Part number (SKU) | TSS12 |
| d H7 [mm] | 12 |
| D [mm] | 32 |
| B [mm] | 10 |
| d1 [mm] | 18 |
| D1 [mm] | 29,5 |
| E [mm] | 0,6 |
| r1 [mm] | 0,6 |
| b [mm] | 4 |
| t [mm] | 1,8 |
| Torque [Nm] | 17 |
| Drag torque [Nm] | 0,009 |
| Max. overrunning inner race [min 1] | 4000 |
| Max. overrunning outer race [min 1] | 2000 |
| Weight [g] | 31 |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
Internal freewheels TSS-12 inner diameter 12mm outer diameter 32mm width 10mm with keyway at inner ring PN: TSS12
These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D x B correspond to the dimensions of ball bearing series 62. With keyway on the inner ring.
Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3.
Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel.
Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used.
Temperature range: approx. -10°C to + 50°C.
Other versions on request.
$107.75
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $107.75 |
| 10 - 24 | 1.67 % | $105.95 |
| 25 - 49 | 3.33 % | $104.16 |
| 50+ | 5 % | $102.36 |
