| Part number (SKU) | 42103306 |
| Ratio [in] | 26.5 : 1 |
| Ratio actual [iist] | 53/2 |
| Max. input power at 1,500 min-1 [P1] | 1.67 [kW] |
| Max. torque at 1,500 min-1 [T2] | 245 [Nm] |
| Level of efficiency at 1,500 min-1 | 0.87 [eta] |
| Max. input power at 10 min-1 [P1] | 0.03 [kW] |
| Max. torque at 10 min-1 [T2] | 444 [Nm] |
| Level of efficiency at 10 min-1 | 0.73 [eta] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
Worm gear unit ZM/I version HL size 80 i=26.5:1 (For operating instructions please visit the download area of our website www.maedler.de) PN: 42103306
General data: Universal heavy-duty gearboxes. Centre distance 100
– 315 mm available on request. Housing: High-quality grey cast
iron, all sides machined and with mounting holes on 4 sides. Gearing:
13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear
made from special centrifugally cast bronze. Efficiency factor:
The efficiency factors stated in the selection tables are guideline
values for properly run-in and lubricated gearboxes at operating
temperature with nominal load and driving worm shaft. Proper running in
is a crucial factor influencing the lifetime of the gearbox. The
starting efficiency factor is, as the operating efficiency factor,
depending on the lead angle. Self-locking: Self-locking only
occurs in worm gear units, when the unit cannot be driven from the
output side. Worms with 4 and 6 threads sometimes permit transmission
ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be
implicitly self-locking, or must implicitly not be self-locking, we urge
you to contact us. Only the ratios 43:1 product No. 42103314 and 72:1
product No. 42103313 are generally self-locking and optimized for manual
operation. Bearing system: All gearbox shafts with generously
dimensioned roller bearings. Lubrication: The gearboxes are
lubricated for life using synthetic oil. Under normal operating
conditions, no maintenance is required. The housing should be checked
for leakages at an interval of approx. 2 years. Ventilation: The
sealing plug has to be exchanged with the separately packed venting
filter.
$1,270.37
Ships within 6-8 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $1,270.37 |
| 10+ | 5.65 % | $1,198.63 |
