Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

0.5

  • Rod end GS DIN ISO 12240-4 series K internal thread M3 right == Initial lubrication required before use == PN: 63200300
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M3 right == Initial lubrication required before use == PN: 63200300

     $25.02 Add to cart
  • Rod end GS DIN ISO 12240-4 series K internal thread M3 left == Initial lubrication required before use == PN: 63210300
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M3 left == Initial lubrication required before use == PN: 63210300

     $25.02 Add to cart
  • Rod end GS DIN ISO 12240-4 series K external thread M3 right == Initial lubrication required before use == PN: 63220300
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M3 right == Initial lubrication required before use == PN: 63220300

     $25.02 Add to cart
  • Rod end GS DIN ISO 12240-4 series K external thread M3 left == Initial lubrication required before use == PN: 63230300
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M3 left == Initial lubrication required before use == PN: 63230300

     $25.02 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top