Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1.5

Showing 1–20 of 129 results

  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars, with Thread, Steel

    Clamp collar with thread single split steel C45 black oxide finished thread M10 x 1.50 with bolt DIN 912 12.9 PN: 62361000

     $7.26 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars with Thread, Double-Split, Material Steel

    Clamp collar with thread double split steel C45 black oxide finished thread M10 x 1,5 with bolts DIN 912 12.9 PN: 62391000

     $10.84 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars, with Thread, Stainless Steel

    Clamp collar with thread single split stainless steel 1.4305 thread M 10 x 1.50 with bolt DIN 912 A2-70 PN: 62399610

     $22.97 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars with Thread, Double-Split, Stainless Steel

    Clamp collar with thread double split stainless steel 1.4305 thread M10 x 1,5 with bolts DIN 912 A2-70 PN: 62399910

     $24.99 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M10 right == Initial lubrication required before use == PN: 63201000

     $28.02 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M18x1.5 right == Initial lubrication required before use == PN: 63201800

     $61.68 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M20x1.5 right == Initial lubrication required before use == PN: 63202000

     $80.92 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M22x1.5 right == Initial lubrication required before use == PN: 63202200

     $100.04 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M10 left == Initial lubrication required before use == PN: 63211000

     $28.02 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M18x1.5 left == Initial lubrication required before use == PN: 63211800

     $60.68 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M20x1.5 left == Initial lubrication required before use == PN: 63212000

     $80.92 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M10 right == Initial lubrication required before use == PN: 63221000

     $27.09 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 right == Initial lubrication required before use == PN: 63221800

     $53.39 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M20x1.5 right == Initial lubrication required before use == PN: 63222000

     $69.75 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M22x1.5 right == Initial lubrication required before use == PN: 63222200

     $84.83 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M10 left == Initial lubrication required before use == PN: 63231000

     $27.09 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left == Initial lubrication required before use == PN: 63231800

     $53.39 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M20x1.5 left == Initial lubrication required before use == PN: 63232000

     $69.75 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M22x1.5 left == Initial lubrication required before use == PN: 63232200

     $84.83 Add to cart
  • Rod ends BR DIN ISO 12240-4, K, with spherical roller bearingRod ends BR DIN ISO 12240-4,K,with spherical roller bearing,with internal threadRod Ends DIN ISO 12240 (ex DIN 648)Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end BR DIN ISO 12240-4 series K internal thread M10 right with spherical ball bearing PN: 63241000

     $59.56 Add to cart

Maedler North America is your perfect partner for everything that revolves around drive-train technology. With an inventory of over  35,000 parts, we’re confident that you’ll find what you are looking for.

We Are Here To Assist You

contact us today

Menu

Copyright © MaedlerNorthAmerica | Powered by MaedlerNorthAmerica.com

Scroll to Top