Maedler North America

Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

2.0

Showing 1–20 of 160 results

  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars, with Thread, Steel

    Clamp collar with thread single split steel C45 black oxide finished thread M16 x 2.00 with bolt DIN 912 12.9 PN: 62361600

     $10.42 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars with Thread, Double-Split, Material Steel

    Clamp collar with thread double split steel C45 black oxide finished thread M16 x 2,0 with bolts DIN 912 12.9 PN: 62391600

     $16.28 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars, with Thread, Stainless Steel

    Clamp collar with thread single split stainless steel 1.4305 thread M 16 x 2.00 with bolt DIN 912 A2-70 PN: 62399616

     $31.17 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars with Thread, Double-Split, Stainless Steel

    Clamp collar with thread double split stainless steel 1.4305 thread M16 x 2,0 with bolts DIN 912 A2-70 PN: 62399916

     $34.66 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M14 right == Initial lubrication required before use == PN: 63201400

     $35.16 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M16 right == Initial lubrication required before use == PN: 63201600

     $46.03 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == PN: 63202500

     $93.25 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M30x2 right == Initial lubrication required before use == PN: 63203000

     $121.98 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M36x2 right == Initial lubrication required before use == PN: 63203500

     $141.33 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M42x2 right == Initial lubrication required before use == PN: 63204000

     $198.91 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M14 left == Initial lubrication required before use == PN: 63211400

     $35.16 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M16 left == Initial lubrication required before use == PN: 63211600

     $46.00 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == PN: 63212500

     $93.22 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M30x2 left == Initial lubrication required before use == PN: 63213000

     $122.00 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M36x2 left == Initial lubrication required before use == PN: 63213500

     $141.49 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M42x2 left == Initial lubrication required before use == PN: 63214000

     $198.93 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M14 right == Initial lubrication required before use == PN: 63221400

     $34.63 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M16 right == Initial lubrication required before use == PN: 63221600

     $45.21 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M24x2 right == Initial lubrication required before use == PN: 63222500

     $91.02 Add to cart
  • Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M30x2 right == Initial lubrication required before use == PN: 63223000

     $119.79 Add to cart

Maedler North America is your perfect partner for everything that revolves around drive-train technology. With an inventory of over  35,000 parts, we’re confident that you’ll find what you are looking for.

We Are Here To Assist You

contact us today

Copyright © MaedlerNorthAmerica | Powered by MaedlerNorthAmerica.com