Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

80

  • Flexible coupling EL size 24 nominal torque 40Nm short version pilot bore length 80mm outer diameter 48mm PN: 60204300
    Couplings, Friction Clutches, Safety CouplingsFlexible Couplings ELTorsionally Elastic, Angular Elastic, Longitudinally Flexible

    Flexible coupling EL size 24 nominal torque 40Nm short version pilot bore length 80mm outer diameter 48mm PN: 60204300

     $253.65 Add to cart
  • Flexible coupling EL size 20 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 45mm PN: 60299040
    Couplings, Friction Clutches, Safety CouplingsFlexible Couplings ELTorsionally Elastic, Angular Elastic, Longitudinally Flexible

    Flexible coupling EL size 20 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 45mm PN: 60299040

     $319.62 Add to cart
  • Flexible coupling EL size 24 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 48mm PN: 60299043
    Couplings, Friction Clutches, Safety CouplingsFlexible Couplings ELTorsionally Elastic, Angular Elastic, Longitudinally Flexible

    Flexible coupling EL size 24 nominal torque 40 Nm short version pilot bore stainless steel 1.4305 length 80mm outer diameter 48mm PN: 60299043

     $374.52 Add to cart
  • Ball joint RW bore 16H7 material steel outer diameter 32mm total length 80mm PN: 63133200
    Ball Joints RW, SteelSingle Universal Joints in different modelsUniversal Joints

    Ball joint RW bore 16H7 material steel outer diameter 32mm total length 80mm PN: 63133200

     $92.47 Add to cart
  • Ball joint RW bore 16H7 with keyway DIN 6885-1 on both sides outer diameter 32 mm steel PN: 63133200N
    Ball Joints RW, SteelSingle Universal Joints in different modelsUniversal Joints

    Ball joint RW bore 16H7 with keyway DIN 6885-1 on both sides outer diameter 32 mm steel PN: 63133200N

     $120.28 Add to cart
  • Splined hub with flange DIN ISO 14 KN 42x48 length 80mm steel C45Pb PN: 64851000
    Splined Hubs with Flange - DIN ISO 14 made of Steel C45Splined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 42×48 length 80mm steel C45Pb PN: 64851000

     $168.03 Add to cart
  • Splined hub with flange DIN ISO 14 KN 36x42 length 80mm steel C45Pb PN: 64851200
    Splined Hubs with Flange - DIN ISO 14 made of Steel C45Splined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 36×42 length 80mm steel C45Pb PN: 64851200

     $148.81 Add to cart
  • Splined hub with flange DIN ISO 14 KN 42x48 length 80mm red brass Rg7 PN: 64856000
    Splined Hubs with Flange - DIN ISO 14 made of Red BrassSplined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 42×48 length 80mm red brass Rg7 PN: 64856000

     $356.00 Add to cart
  • Splined hub with flange DIN ISO 14 KN 36x42 length 80mm red brass Rg7 PN: 64856200
    Splined Hubs with Flange - DIN ISO 14 made of Red BrassSplined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 36×42 length 80mm red brass Rg7 PN: 64856200

     $264.06 Add to cart
  • Splined hub with flange DIN ISO 14 KN 42x48 length 80mm stainless steel 1.4305 PN: 64899510
    Splined Hubs with Flange - DIN ISO 14 made of Stainless SteelSplined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 42×48 length 80mm stainless steel 1.4305 PN: 64899510

     $333.84 Add to cart
  • Splined hub with flange DIN ISO 14 KN 36x42 length 80mm stainless steel 1.4305 PN: 64899512
    Splined Hubs with Flange - DIN ISO 14 made of Stainless SteelSplined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 36×42 length 80mm stainless steel 1.4305 PN: 64899512

     $302.44 Add to cart
  • Grub screw DIN 6332 with thrust point thread M10 length 80mm steel strength 5.8 black oxide finished PN: 65401500
    Grub Screws DIN 6332 with Thrust Point, Type SMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point thread M10 length 80mm steel strength 5.8 black oxide finished PN: 65401500

     $4.61 Add to cart
  • Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M10 length 80mm steel strength 5.8 black oxide finished PN: 65401501
    Grub Screws DIN 6332 with Thrust Point, Type SKMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M10 length 80mm steel strength 5.8 black oxide finished PN: 65401501

     $5.27 Add to cart
  • Grub screw DIN 6332 with thrust point thread M12 length 80mm steel strength 5.8 black oxide finished PN: 65401900
    Grub Screws DIN 6332 with Thrust Point, Type SMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point thread M12 length 80mm steel strength 5.8 black oxide finished PN: 65401900

     $5.66 Add to cart
  • Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M12 length 80mm steel strength 5.8 black oxide finished PN: 65401901
    Grub Screws DIN 6332 with Thrust Point, Type SKMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M12 length 80mm steel strength 5.8 black oxide finished PN: 65401901

     $8.62 Add to cart
  • Grub screw DIN 6332 with thrust point thread M16 length 80mm steel strength 5.8 black oxide finished PN: 65402400
    Grub Screws DIN 6332 with Thrust Point, Type SMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point thread M16 length 80mm steel strength 5.8 black oxide finished PN: 65402400

     $9.31 Add to cart
  • Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M16 length 80mm steel strength 5.8 black oxide finished PN: 65402401
    Grub Screws DIN 6332 with Thrust Point, Type SKMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point type IS with internal hexagon thread M16 length 80mm steel strength 5.8 black oxide finished PN: 65402401

     $10.11 Add to cart
  • Grub screw DIN 6332 with thrust point thread M10 length 80mm stainless steel PN: 6549901500
    Grub Screws DIN 6332 with Thrust Point, Type S, Stainless steelMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point thread M10 length 80mm stainless steel PN: 6549901500

     $4.81 Add to cart
  • Grub screw DIN 6332 with thrust point with internal hexagon thread M10 length 80mm stainless steel PN: 6549901501
    Grub Screws DIN 6332 with Thrust Point, Type SK, Stainless steelMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point with internal hexagon thread M10 length 80mm stainless steel PN: 6549901501

     $5.71 Add to cart
  • Grub screw DIN 6332 with thrust point thread M12 length 80mm stainless steel PN: 6549901900
    Grub Screws DIN 6332 with Thrust Point, Type S, Stainless steelMachine Mounts, Rubber-Buffers, Dampers

    Grub screw DIN 6332 with thrust point thread M12 length 80mm stainless steel PN: 6549901900

     $7.64 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top