Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

0.17

  • Sprocket KRS with hub 10 B-1 5/8x3/8" 9 teeth material steel PN: 10610900
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 5/8 x 3/8", ISO 10 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 10 B-1 5/8×3/8″ 9 teeth material steel PN: 10610900

     $7.77 Add to cart
  • Plate wheel KRL without hub 10 B-1 5/8x3/8" 12 teeth material steel PN: 10621200
    Plate wheels KRL, Pitch 5/8 x 3/8", ISO 10 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 10 B-1 5/8×3/8″ 12 teeth material steel PN: 10621200

     $7.06 Add to cart
  • Double sprocket ZRE for 2 single roller chains 06 B-1 14 teeth material steel PN: 12141400
    Double-Sprockets for two Single-Strand Roller Chains DIN 8187Double-Sprockets ZRE for two Single-Strand Roller Chains 06 B-1Double-Sprockets ZRE for two Single-Strand Roller Chains DIN 8187SprocketsSprockets, Chains, Accessories

    Double sprocket ZRE for 2 single roller chains 06 B-1 14 teeth material steel PN: 12141400

     $9.94 Add to cart
  • Double sprocket ZREG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened PN: 12188414
    Double-Sprockets for two Single-Strand Roller Chains DIN 8187Double-Sprockets ZREG for two Single-Strand Roller Chains 06 B-1Double-Sprockets ZREG for two Single-Strand Roller Chains DIN 8187, HardenedSprocketsSprockets, Chains, Accessories

    Double sprocket ZREG for 2 single roller chains 06 B-1 14 teeth material steel teeth hardened PN: 12188414

     $10.65 Add to cart
  • Double-strand plate wheel ZRL without hub 08 B-2 1/2x5/16" 11 teeth material steel PN: 12521100
    Double-Plate Wheels ZRL, Pitch 1/2 x 5/16", ISO 08 B-2Double-Plate Wheels ZRL, Pre-boredDouble-SprocketsSprocketsSprockets, Chains, Accessories

    Double-strand plate wheel ZRL without hub 08 B-2 1/2×5/16″ 11 teeth material steel PN: 12521100

     $11.94 Add to cart
  • Tensioning roller diameter 40mm PN: 14087400
    Tensioning Rollers from PlasticTiming Belts and Pulleys

    Tensioning roller diameter 40mm PN: 14087400

     $47.86 Add to cart
  • timing bar HTD 3M 25 teeth toothed length min. 150mm total length 165mm material aluminium PN: 17092500
    Pulleys Profile HTDTiming Bars Profile HTD 3M, AluminiumTiming Belts and Pulleys

    timing bar HTD 3M 25 teeth toothed length min. 150mm total length 165mm material aluminium PN: 17092500

     $28.17 Add to cart
  • Timing belt pulley L material steel 12 teeth for belt width 050=12.7mm PN: 18211200
    Pulleys Inch-ProfilePulleys L 050Timing Belts and Pulleys

    Timing belt pulley L material steel 12 teeth for belt width 050=12.7mm PN: 18211200

     $10.76 Add to cart
  • Timing belt pulley L material steel 11 teeth for belt width 075=19.1mm PN: 18221100
    Pulleys Inch-ProfilePulleys L 075Timing Belts and Pulleys

    Timing belt pulley L material steel 11 teeth for belt width 075=19.1mm PN: 18221100

     $11.19 Add to cart
  • Timing belt pulley L material steel 10 teeth for belt width 100=25.4mm PN: 18231000
    Pulleys Inch-ProfilePulleys L 100Timing Belts and Pulleys

    Timing belt pulley L material steel 10 teeth for belt width 100=25.4mm PN: 18231000

     $12.12 Add to cart
  • Gear rack steel C45K module 1 tooth width 10mm height 10mm length 250mm PN: 22460300
    Gear Racks, Steel C45K, Quality 8, Module 0.5 to 10Spur Gears, Toothed Racks, Internal Gears, Ratchet WheelsSquare Gear Racks, Straight Tooth System

    Gear rack steel C45K module 1 tooth width 10mm height 10mm length 250mm PN: 22460300

     $20.08 Add to cart
  • Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm PN: 23211012
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 2.5Spur Gears, Steel, Module 2.5, Tooth Width 25 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm PN: 23211012

     $31.28 Add to cart
  • Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm teeth induction hardened PN: 23288112
    Spur Gears, Steel C45, Hardened Teeth, Module 1-8Spur Gears, Steel C45, Hardened Teeth, Module 2.5Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 2.5 12 teeth tooth width 25mm outside diameter 35mm teeth induction hardened PN: 23288112

     $47.75 Add to cart
  • Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges PN: 61200100
    Couplings, Friction Clutches, Safety CouplingsSliding HubsSliding Hubs FSSliding Hubs FS

    Sliding hub FS torque adjustable 1-10 Nm with pilot bore outer diameter 30mm with 4 disc springs max. bore: 10mm bush length 4.2mm lock washer without edges PN: 61200100

     $65.54 Add to cart
  • Locking assembly SSGK bore 35mm size 35x45x21.5mm PN: 61520135
    Locking Assemblies SSGK, boreholes 14 - 60 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly SSGK bore 35mm size 35x45x21.5mm PN: 61520135

     $30.75 Add to cart
  • Clamping bush MSD bore 19mm steel PN: 61521900
    Clamping Bushes MSD, boreholes 15 - 50mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Clamping bush MSD bore 19mm steel PN: 61521900

     $269.01 Add to cart
  • Shrink disc ST inner diameter 20mm PN: 61582000
    Locking Assemblies, Clamping Bushes, Taper BushesShrink Disks ST

    Shrink disc ST inner diameter 20mm PN: 61582000

     $33.47 Add to cart
  • Clamping bush E bore 15.875mm PN: 61591587
    Clamping Bushes E, boreholes 15 - 50 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Clamping bush E bore 15.875mm PN: 61591587

     $342.80 Add to cart
  • Shrink disc ST-R stainless steel 1.4057 inner diameter 20mm PN: 61599820
    Locking Assemblies, Clamping Bushes, Taper BushesShrink Disks ST-R, Stainless Steel

    Shrink disc ST-R stainless steel 1.4057 inner diameter 20mm PN: 61599820

     $89.02 Add to cart
  • Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M3 x 5mm PN: 61900305
    Fastening ElementsHexagon Socket Set Screws ISO 4027 with Cone Point, Steel

    Hexagon socket set screw with cone point ISO 4027 (ex DIN 914) steel 45H M3 x 5mm PN: 61900305

     $0.20 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top