Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

0.77

Showing all 20 results

  • Single-SprocketsSprocketsSprockets KRT for Taper BushesSprockets KRT for Taper Bushes, Pitch 5/8 x 3/8", ISO 10 B-1Sprockets, Chains, Accessories

    Sprocket KRT 10 B-1 5/8×3/8″ 20 teeth material steel for taper bush type 1610 PN: 10677120

     $26.55 Add to cart
  • Single-SprocketsSprocketsSprockets KRT for Taper BushesSprockets KRT for Taper Bushes, Pitch 5/8 x 3/8", ISO 10 B-1Sprockets, Chains, Accessories

    Sprocket KRT 10 B-1 5/8×3/8″ 22 teeth material steel for taper bush type 1610 PN: 10677122

     $31.85 Add to cart
  • Single-SprocketsSprocketsSprockets KRTG for Taper Bushes, ISO 10 B-1, 5/8 x 3/8'', Teeth hardenedSprockets KRTG for Taper Bushes, Teeth hardenedSprockets, Chains, Accessories

    Sprocket KRTG 10 B-1 5/8×3/8″ 20 teeth material steel teeth hardened for taper bush type 1610 PN: 10678120

     $27.26 Add to cart
  • Single-SprocketsSprocketsSprockets KRTG for Taper Bushes, ISO 10 B-1, 5/8 x 3/8'', Teeth hardenedSprockets KRTG for Taper Bushes, Teeth hardenedSprockets, Chains, Accessories

    Sprocket KRTG 10 B-1 5/8×3/8″ 22 teeth material steel teeth hardened for taper bush type 1610 PN: 10678122

     $32.52 Add to cart
  • Plastic Guide Rails for Double-Strand Roller ChainsRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Plastic guide rail 40 x 20 x 1000mm for double-strand roller chain 10B-2 PN: 14102602

     $44.77 Add to cart
  • Plastic Guide Rails for Triple-Strand Roller ChainsRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Plastic guide rail 35 x 10 x 1000mm for roller chain 06 B-3 PN: 14103100

     $26.29 Add to cart
  • Pulleys H 075Pulleys Inch-ProfileTiming Belts and Pulleys

    Timing belt pulley H material steel 16 teeth for belt width 075=19.1mm PN: 18401600

     $19.51 Add to cart
  • Pulleys H 100Pulleys Inch-ProfileTiming Belts and Pulleys

    Timing belt pulley H material steel 15 teeth for belt width 100=25.4mm PN: 18411500

     $17.92 Add to cart
  • Spur Gear Shafts, Steel, Module 1 to 2Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear shaft made from steel with one-sided hub module 1.5 17 teeth toothed length 180mm total length 230mm outside diameter 28.5mm PN: 21851700

     $136.25 Add to cart
  • Gear Racks, Steel C45K, Quality 8, Module 0.5 to 10Spur Gears, Toothed Racks, Internal Gears, Ratchet WheelsSquare Gear Racks, Straight Tooth System

    Gear rack steel C45K module 1.5 tooth width 15mm height 15mm length 500mm PN: 22860300

     $31.66 Add to cart
  • Gear Racks, Stainless Steel, Module 1 to 4Spur Gears, Toothed Racks, Internal Gears, Ratchet WheelsSquare Gear Racks, Straight Tooth System

    Gear rack made of stainless steel 1.4305 module 1.5 tooth width 15mm height 15mm length 500mm PN: 22899603

     $100.55 Add to cart
  • Spur Gears Polyketone die-cast, Module 0.5 to 3Spur Gears Polyketone die-cast, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyketone die-cast with hub module 0.7 15 teeth tooth width 6mm outside diameter 11,9mm PN: 28201501

     $1.00 Add to cart
  • Gear Boxes and Geared MotorsPush-In Type Output Shafts for H/I, Double SidedWorm Gear Units, up to 878 Nm

    Output shaft double-sided for Worm gear unit H/I size 50 diameter 25mm overall length 196 7mm PN: 42205002

     $87.31 Add to cart
  • Gear Boxes and Geared MotorsPush-In Output Shafts HMD, Double SidedWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors HMD/I, up to 351 Nm, 9 to 200 rpm

    Output shaft double sided for worm geared motor HMD/I and HMD/II gearbox size 050 diameter 25mm overall length 200mm PN: 43805200

     $69.18 Add to cart
  • Locking Assemblies COM-CB1, boreholes 18 - 100 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-CB1 bore 55mm size 55x85x33mm PN: 61557355

     $28.75 Add to cart
  • Locking Assemblies COM-CB2, boreholes 18 - 100 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-CB2 bore 50mm size 50x80x33mm PN: 61557550

     $28.62 Add to cart
  • Levelling Feet 344, Plastic with Steel Bolt zinc-platedMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344 type A M24 x 158mm long foot diameter 100mm PN: 65532800

     $21.42 Add to cart
  • Levelling Feet 344, Plastic with Steel Bolt zinc-platedMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344 type AG M24 x 158mm long foot diameter 100mm PN: 65535800

     $27.51 Add to cart
  • Levelling Feet 344.5, Plastic with Stainless Steel BoltMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344.5 type N M24 x 158mm long foot diameter 100mm bolt made from stainless steel PN: 65599328

     $51.32 Add to cart
  • Levelling Feet 344.5, Plastic with Stainless Steel BoltMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344.5 type NG M24 x 158mm long foot diameter 100mm bolt made from stainless steel PN: 65599358

     $57.21 Add to cart

Maedler North America is your perfect partner for everything that revolves around drive-train technology. With an inventory of over  30,000 parts, we’re confident that you’ll find what you are looking for.

We Are Here To Assist You

contact us today

Menu

Copyright © MaedlerNorthAmerica 2021 | Powered by MaedlerNorthAmerica.com

Scroll to Top