Maedler North America

0.88

Showing all 20 results

  • Double-Plate Wheels ZRL, Pitch 3/4 x 7/16", ISO 12 B-2Double-Plate Wheels ZRL, Pre-boredDouble-SprocketsSprocketsSprockets, Chains, Accessories

    Double-strand plate wheel ZRL without hub 12 B-2 3/4×7/16″ 13 teeth material steel PN: 12721300

    $21.18 Add to cart
  • SprocketsSprockets, Chains, AccessoriesTriple-SprocketsTriple-Sprockets DRT for Taper Bushes, Pitch 3/8 x 7/32", ISO 06 B-3Triple-Sprockets DRT, for Taper Bushes

    Triple-strand sprocket DRT 06 B-3 3/8×7/32″ 30 teeth material steel for taper bush type 1615 PN: 13177130

    $69.27 Add to cart
  • V-Belt Pulleys for Taper Clamping Bushes, 3 GroovesV-Belt Taper-Pulleys, 3 Grooves, Profile XPZ, SPZ and Z (10)V-Belts, Pulleys, Accessories

    V-belt pulley material cast iron for taper-bush 1610 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 90mm PN: 15130900

    $17.43 Add to cart
  • Pulleys Inch-ProfilePulleys L 050Timing Belts and Pulleys

    Timing belt pulley L material steel 25 teeth for belt width 050=12.7mm PN: 18212500

    $17.36 Add to cart
  • Spur Gears Acetal Resin, die-cast, Module 0.5 to 3Spur Gears, Polyacetal, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyacetal resin die-cast with hub module 0.7 15 teeth tooth width 6mm outside diameter 11.9mm PN: 28201500

    $0.83 Add to cart
  • Spur Gears POM white / nature, Milled Teeth, Module 0.5 to 3Spur Gears, POM, milled, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of POM with hub module 0.7 15 teeth tooth width 5mm outside diameter 11.9mm PN: 29201500

    $15.18 Add to cart
  • Gear Boxes and Geared MotorsOutput-Side Flanges HMD/IWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors HMD/I, up to 351 Nm, 9 to 200 rpm

    Output flange for worm geared motor HMD/I gearbox size 085 diameter 205mm overall height 40mm PN: 43808400

    $72.93 Add to cart
  • Gear Boxes and Geared MotorsOutput-side flanges HMD/II, roundWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors HMD/II, up to 351 Nm, 9 to 200 rpm

    Round output flange for worm gear motor HMD/II gearbox size 085 PN: 43908400

    $60.41 Add to cart
  • Locking Assemblies COM-CB1, boreholes 18 - 100 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-CB1 bore 65mm size 65x95x33mm PN: 61557365

    $35.70 Add to cart
  • Locking Assemblies COM-CB2, boreholes 18 - 100 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-CB2 bore 60mm size 60x90x33mm PN: 61557560

    $33.14 Add to cart
  • Locking Assemblies COM-CB3, Boreholes 14 - 50 mm, with new Type ALocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-CB3 heavy series bore 42mm size 42x80x33mm PN: 61557942

    $28.88 Add to cart
  • Clamping Bushes E, boreholes 15 - 50 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Clamping bush E bore 40mm PN: 61594000

    $440.28 Add to cart
  • Clamping Bushes E-N, Stainless, boreholes 15 - 50 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Clamping bush E-N bore 40mm PN: 61599940

    $1,001.31 Add to cart
  • Bearings, Bushes, SealsBushesDrill bushes with collar DIN 172 A

    drill bushing (guide bushing) similar DIN 172 – A 1,8 x 6 PN: 622101806

    $8.09 Add to cart
  • Round Splined Hubs - DIN ISO 14 made of Steel C45Splined Shafts and Toothed Shafts and Hubs

    Splined hub DIN ISO 14 KN 32×38 length 60mm diameter 60mm steel C45Pb PN: 64830800

    $33.90 Add to cart
  • Round Splined Hubs - DIN ISO 14 made of Stainless SteelSplined Shafts and Toothed Shafts and Hubs

    Splined hub DIN ISO 14 KN 32×38 length 60mm diameter 60mm stainless steel 1.4305 PN: 64899308

    $75.13 Add to cart
  • Levelling Feet 344, Plastic with Steel Bolt zinc-platedMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344 type A M24 x 198mm long foot diameter 100mm PN: 65532900

    $23.88 Add to cart
  • Levelling Feet 344, Plastic with Steel Bolt zinc-platedMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344 type AG M24 x 198mm long foot diameter 100mm PN: 65535900

    $30.06 Add to cart
  • Levelling Feet 344.5, Plastic with Stainless Steel BoltMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344.5 type N M24 x 198mm long foot diameter 100mm bolt made from stainless steel PN: 65599329

    $57.87 Add to cart
  • Levelling Feet 344.5, Plastic with Stainless Steel BoltMachine Mounts, Rubber-Buffers, Dampers

    Leveling foot 344.5 type NG M24 x 198mm long foot diameter 100mm bolt made from stainless steel PN: 65599359

    $62.06 Add to cart
Scroll to Top