Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1.53

  • Sprocket KRS with hub 10 B-1 5/8x3/8" 24 teeth material steel PN: 10612400
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 5/8 x 3/8", ISO 10 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 10 B-1 5/8×3/8″ 24 teeth material steel PN: 10612400

     $25.44 Add to cart
  • Plate wheel KRL without hub 10 B-1 5/8x3/8" 34 teeth material steel PN: 10623400
    Plate wheels KRL, Pitch 5/8 x 3/8", ISO 10 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 10 B-1 5/8×3/8″ 34 teeth material steel PN: 10623400

     $29.26 Add to cart
  • Sprocket KRS with hub 12 B-1 3/4x7/16" 17 teeth material steel PN: 10711700
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 3/4 x 7/16", ISO 12 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 12 B-1 3/4×7/16″ 17 teeth material steel PN: 10711700

     $23.25 Add to cart
  • Sprocket KRF with hub 20 B-1 1 1/4"x3/4" 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened PN: 10981025
    Single-SprocketsSprocketsSprockets KRF, Ready-To-Install, Teeth HardenedSprockets KRF, Teeth Hardened, ISO 20 B-1, Pitch 1 1/4" x 3/4"Sprockets, Chains, Accessories

    Sprocket KRF with hub 20 B-1 1 1/4″x3/4″ 10 teeth material steel bore 25H7 keyway DIN 6885/1 2 set screw threads teeth induction hardened PN: 10981025

     $69.71 Add to cart
  • Clamping bush MSA bore 50mm PN: 61505000
    Clamping Bushes MSA, boreholes 19 - 50 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Clamping bush MSA bore 50mm PN: 61505000

     $385.08 Add to cart
  • Locking assembly COM-B bore 55mm size 55-71 PN: 61565500
    Locking Assemblies COM-B, boreholes 6 - 100 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-B bore 55mm size 55-71 PN: 61565500

     $88.54 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top