Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1,11

  • Sprocket KRS with hub pitch 6mm 30 teeth material steel PN: 10063000
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 6mm, ISO 04Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub pitch 6mm 30 teeth material steel PN: 10063000

     $9.89 Add to cart
  • Sprocket KRR with hub pitch 6mm 30 teeth material stainless steel 1.4301 (AISI 304) PN: 10099630
    Single-SprocketsSprocketsSprockets KRR Made of Stainless SteelSprockets KRR Made of Stainless Steel, Pitch 6 mm, ISO 04Sprockets, Chains, Accessories

    Sprocket KRR with hub pitch 6mm 30 teeth material stainless steel 1.4301 (AISI 304) PN: 10099630

     $43.86 Add to cart
  • Plate wheel KRL without hub 06 B-1 3/8x7/32" 21 teeth material steel PN: 10122100
    Plate wheels KRL, Pitch 3/8 × 7/32", ISO 06 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 06 B-1 3/8×7/32″ 21 teeth material steel PN: 10122100

     $6.50 Add to cart
  • Timing belt pulley XL material aluminium 20 teeth for belt width 037=9.53mm PN: 18032000
    Pulleys Inch-ProfilePulleys XL 037Timing Belts and Pulleys

    Timing belt pulley XL material aluminium 20 teeth for belt width 037=9.53mm PN: 18032000

     $11.78 Add to cart
  • Timing belt pulley XL material aluminium 21 teeth for belt width 037=9.53mm PN: 18032100
    Pulleys Inch-ProfilePulleys XL 037Timing Belts and Pulleys

    Timing belt pulley XL material aluminium 21 teeth for belt width 037=9.53mm PN: 18032100

     $11.90 Add to cart
  • Spur gear made of steel C45 with hub module 1 50 teeth tooth width 6.5mm outside diameter 52mm PN: 21305000
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1Spur Gears, Steel, Module 1, Tooth Width 6.5 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1 50 teeth tooth width 6.5mm outside diameter 52mm PN: 21305000

     $26.55 Add to cart
  • Spur gear made of steel C45 with hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm PN: 21603000
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.25Spur Gears, Steel, Module 1.25, Tooth Width 10 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1.25 30 teeth tooth width 10mm outside diameter 40mm PN: 21603000

     $26.83 Add to cart
  • Spur gear made of polyketone die-cast with hub module 1 140 teeth tooth width 9mm outside diameter 142mm PN: 28314001
    Spur Gears Polyketone die-cast, Module 0.5 to 3Spur Gears Polyketone die-cast, Module 1Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyketone die-cast with hub module 1 140 teeth tooth width 9mm outside diameter 142mm PN: 28314001

     $18.09 Add to cart
  • Spur gear made of polyacetal resin die-cast with hub module 2.5 38 teeth tooth width 17mm outside diameter 100mm PN: 28703800
    Spur Gears Acetal Resin, die-cast, Module 0.5 to 3Spur Gears, Polyacetal, Module 2.5Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyacetal resin die-cast with hub module 2.5 38 teeth tooth width 17mm outside diameter 100mm PN: 28703800

     $17.61 Add to cart
  • Bevel gear made of steel module 1 40 teeth i=1:1 milled PN: 36052600
    Bevel GearsBevel Gears, Steel, Straight Tooth System, ratio 1:1Bevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of steel module 1 40 teeth i=1:1 milled PN: 36052600

     $45.78 Add to cart
  • Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type N PN: 62312500N
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type N, Steel, black oxide finish

    Clamp collar single-split steel C45 black oxide finished bore 25mm with bolt DIN 912 12.9 type N PN: 62312500N

     $16.00 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type B1 PN: 62342000B1
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, black oxided

    Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type B1 PN: 62342000B1

     $19.71 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type B2 PN: 62342000B2
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, black oxided

    Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type B2 PN: 62342000B2

     $20.71 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type GA PN: 62342000GA
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type GA, Steel, black oxide finish

    Clamp collar double-split steel C45 black oxide finished bore 20mm with bolts DIN 912 12.9 type GA PN: 62342000GA

     $21.05 Add to cart
  • Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type N PN: 62399125N
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type N, Stainless

    Clamp collar single-split stainless steel 1.4305 bore 25mm with bolt DIN 912 A2-70 type N PN: 62399125N

     $37.75 Add to cart
  • Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type B1 PN: 62399420B1
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Stainless

    Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type B1 PN: 62399420B1

     $39.43 Add to cart
  • Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type B2 PN: 62399420B2
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Stainless

    Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type B2 PN: 62399420B2

     $41.39 Add to cart
  • Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type GA PN: 62399420GA
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type GA, Stainless

    Clamp collar double-split stainless steel 1.4305 bore 20mm with bolts DIN 912 A2-70 type GA PN: 62399420GA

     $34.75 Add to cart
  • Nut DIN 508 for T-slot 20mm DIN 650 thread M18 quality 10 PN: 65511820
    Fastening ElementsT-Nuts DIN 508 for Tee Slots DIN 650 / ISO 299T-Nuts DIN 508 for Tee Slots DIN 650 / ISO 299, black

    Nut DIN 508 for T-slot 20mm DIN 650 thread M18 quality 10 PN: 65511820

     $8.52 Add to cart
  • Nut DIN 508 for T-slot 20mm DIN 650 thread M18 quality 10 zinc plated PN: 65511820VZ
    Fastening ElementsT-Nuts DIN 508 for Tee Slots DIN 650 / ISO 299T-Nuts DIN 508 for Tee Slots DIN 650 / ISO 299, zinc-plated

    Nut DIN 508 for T-slot 20mm DIN 650 thread M18 quality 10 zinc plated PN: 65511820VZ

     $9.85 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top