Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1,33

  • Sprocket KRS with hub pitch 8mm 23 teeth material steel PN: 10082300
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 8mm, ISO 05 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub pitch 8mm 23 teeth material steel PN: 10082300

     $8.56 Add to cart
  • Spur gear made of steel 11SMn30+C with hub module 0.7 90 teeth tooth width 5mm outside diameter 64.4mm PN: 21209000
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel 11SMn30+C with hub module 0.7 90 teeth tooth width 5mm outside diameter 64.4mm PN: 21209000

     $35.48 Add to cart
  • Spur gear made of steel C45 without hub module 1 48 teeth tooth width 10mm outside diameter 50mm PN: 22404800
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1Spur Gears, Steel, Module 1, Tooth Width 10 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 1 48 teeth tooth width 10mm outside diameter 50mm PN: 22404800

     $25.04 Add to cart
  • Spur gear made of polyketone die-cast with hub module 3 32 teeth tooth width 19mm outside diameter 102mm PN: 28803201
    Spur Gears Polyketone die-cast, Module 0.5 to 3Spur Gears Polyketone die-cast, Module 3Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyketone die-cast with hub module 3 32 teeth tooth width 19mm outside diameter 102mm PN: 28803201

     $20.94 Add to cart
  • spur gear POM black with hub module 2,5 25 teeth tooth width 25mm outer diameter 67,5mm PN: 29711025
    Spur Gears POM black, Milled Teeth, Module 1 to 3Spur Gears, POM black, milled, Module 2.5Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    spur gear POM black with hub module 2,5 25 teeth tooth width 25mm outer diameter 67,5mm PN: 29711025

     $45.52 Add to cart
  • MAEDLER tapered roller bearing 30303 inner-ø 17mm outer-ø 47mm height 15,25mm PN: 30303-MAE
    Ball Bearings / Roller BearingsBearings, Bushes, SealsTapered Roller Bearings MÄDLER®, Single Row

    MAEDLER tapered roller bearing 30303 inner-ø 17mm outer-ø 47mm height 15,25mm PN: 30303-MAE

     $9.14 Add to cart
  • Bevel gear made of steel module 1.5 30 teeth i=1.5:1 milled PN: 36075300
    Bevel GearsBevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1Bevel Gears, Steel, Straight Tooth System, ratio 1.5:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of steel module 1.5 30 teeth i=1.5:1 milled PN: 36075300

     $48.14 Add to cart
  • Bevel gear made of steel module 2 18 teeth i=2.5:1 milled PN: 36106800
    Bevel GearsBevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1Bevel Gears, Steel, Straight Tooth System, ratio 2.5:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of steel module 2 18 teeth i=2.5:1 milled PN: 36106800

     $46.16 Add to cart
  • Clamp collar single-split steel C45 black oxide finished bore 26mm with bolt DIN 912 12.9 PN: 62312600
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Single-Split, Steel

    Clamp collar single-split steel C45 black oxide finished bore 26mm with bolt DIN 912 12.9 PN: 62312600

     $11.70 Add to cart
  • Clamp collar double-split aluminium bore 50mm with bolts DIN 912 A2-70 PN: 62366450
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Split, Aluminium

    Clamp collar double-split aluminium bore 50mm with bolts DIN 912 A2-70 PN: 62366450

     $55.72 Add to cart
  • Clamp collar double-split aluminium anodized bore 50mm with screws DIN 912 A2-70 PN: 62367450
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Split, Aluminium anodized

    Clamp collar double-split aluminium anodized bore 50mm with screws DIN 912 A2-70 PN: 62367450

     $70.08 Add to cart
  • Clamp collar single-split steel C45 zinc-plated bore 26mm with screw DIN 912 12.9 PN: 62388126
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Single-Split, Steel zinc-plated

    Clamp collar single-split steel C45 zinc-plated bore 26mm with screw DIN 912 12.9 PN: 62388126

     $12.98 Add to cart
  • Clamp collar single-split stainless steel 1.4305 bore 26mm with bolt DIN 912 A2-70 PN: 62399126
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Single-Split, Stainless steel

    Clamp collar single-split stainless steel 1.4305 bore 26mm with bolt DIN 912 A2-70 PN: 62399126

     $31.23 Add to cart
  • Leveling pad 2259 type AG thread M10 bolt length 100mm steel black oxide finished PN: 65521001
    Levelling Pads 2259 AG, Steel, black oxide finishMachine Mounts, Rubber-Buffers, Dampers

    Leveling pad 2259 type AG thread M10 bolt length 100mm steel black oxide finished PN: 65521001

     $42.33 Add to cart
  • Leveling pad 2259 type NG thread M10 bolt length 100mm stainless steel 1.4301 (AISI 304) PN: 65521091
    Levelling Pads 2259 NG, Stainless SteelMachine Mounts, Rubber-Buffers, Dampers

    Leveling pad 2259 type NG thread M10 bolt length 100mm stainless steel 1.4301 (AISI 304) PN: 65521091

     $56.73 Add to cart
  • Conical seat DIN 6319 form D outer diameter 56mm stainless steel 1.4301 PN: 65599530
    Conical Seats DIN 6319 Type D, Stainless Steel 1.4301Fastening ElementsSpherical Washers / Conical Seats DIN 6319

    Conical seat DIN 6319 form D outer diameter 56mm stainless steel 1.4301 PN: 65599530

     $12.99 Add to cart
  • Adjustable clamping lever 355 version G with external thread M10 x 63mm lever length L1 = 95mm polyamide black-grey PN: 66555781
    Adjustable Clamping LeversAdjustable Clamping Levers 355, Version G with External Thread, PlasticParts for Operating

    Adjustable clamping lever 355 version G with external thread M10 x 63mm lever length L1 = 95mm polyamide black-grey PN: 66555781

     $17.72 Add to cart
  • Gear lever handle 209 with cylindrical knob M10 l1 160mm steel zinc plated PN: 66617100
    Gear Lever Handles 209Gear Lever Handles 209 with Cylindrical Grip, Steel zinc platedParts for Operating

    Gear lever handle 209 with cylindrical knob M10 l1 160mm steel zinc plated PN: 66617100

     $14.47 Add to cart
  • Gear lever handle 209 with cylindrical knob M10 l1 160mm stainless steel PN: 66699111
    Gear Lever Handles 209Gear Lever Handles 209 with Cylindrical Grip, Stainless SteelParts for Operating

    Gear lever handle 209 with cylindrical knob M10 l1 160mm stainless steel PN: 66699111

     $21.80 Add to cart
  • Rubber buffer GH ø 80mm height 30mm with through hole 21mm PN: 68578030
    Machine Mounts, Rubber-Buffers, DampersRubber Buffers GH

    Rubber buffer GH ø 80mm height 30mm with through hole 21mm PN: 68578030

     $7.27 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top