Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1,59

  • Flange for timing belt pulley thickness 2.5mm Ø 188 x 180 x 158mm steel zinc plated PN: 16010407
    Flanges for Timing Belt Pulleys, SteelTiming Belts and Pulleys

    Flange for timing belt pulley thickness 2.5mm Ø 188 x 180 x 158mm steel zinc plated PN: 16010407

     $35.17 Add to cart
  • Spur gear made of steel C45 without hub module 1.25 42 teeth tooth width 10mm outside diameter 55mm PN: 22604200
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.25Spur Gears, Steel, Module 1.25, Tooth Width 10 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 1.25 42 teeth tooth width 10mm outside diameter 55mm PN: 22604200

     $38.31 Add to cart
  • Internal gear made of brass Ms58 module 1 50 teeth tooth width 8mm outside diameter 75mm PN: 26345000
    Internal Gears, Brass, Module 1Internal Gears, Module 0.5 to 3Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Internal gear made of brass Ms58 module 1 50 teeth tooth width 8mm outside diameter 75mm PN: 26345000

     $81.45 Add to cart
  • Spur gear made of polyacetal resin die-cast with hub module 3 34 teeth tooth width 19mm outside diameter 108mm PN: 28803400
    Spur Gears Acetal Resin, die-cast, Module 0.5 to 3Spur Gears, Polyacetal, Module 3Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyacetal resin die-cast with hub module 3 34 teeth tooth width 19mm outside diameter 108mm PN: 28803400

     $17.85 Add to cart
  • Precision worm wheel centre distance 33mm i=14 28 teeth PN: 32131400
    Bevel Gears, Worm Wheels, WormsCentre Distance in Casing 33 mm + 0,05Precision Worm-Gear SetsWorm Gears - Centre Distance in Casing 33 mm + 0,05Worms, Worm Wheels, Worm Shafts

    Precision worm wheel centre distance 33mm i=14 28 teeth PN: 32131400

     $91.03 Add to cart
  • Locking assembly TT bore 25mm size 25-38 PN: 61550125
    Locking Assemblies TT, boreholes 17 - 35 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly TT bore 25mm size 25-38 PN: 61550125

     $72.30 Add to cart
  • Locknut DIN 1804 type W M40x1.5 black finishing PN: 65264000
    Fastening ElementsLocknuts DIN 1804 w, steelLocknuts, Shaftnuts

    Locknut DIN 1804 type W M40x1.5 black finishing PN: 65264000

     $8.07 Add to cart
  • Locknut DIN 1804 type H M40x1.5 mating surface ground PN: 65284000
    Fastening ElementsLocknuts DIN 1804 h, Steel hardendedLocknuts, Shaftnuts

    Locknut DIN 1804 type H M40x1.5 mating surface ground PN: 65284000

     $17.15 Add to cart
  • Locknut DIN 1804 type RF M40x1.5 stainless steel 1.4301 (AISI304) not hardened PN: 65299640
    Fastening ElementsLocknuts DIN 1804 rf, Stainless SteelLocknuts, Shaftnuts

    Locknut DIN 1804 type RF M40x1.5 stainless steel 1.4301 (AISI304) not hardened PN: 65299640

     $29.03 Add to cart
  • Leveling pad 2259 type AG thread M10 bolt length 150mm steel black oxide finished PN: 65521002
    Levelling Pads 2259 AG, Steel, black oxide finishMachine Mounts, Rubber-Buffers, Dampers

    Leveling pad 2259 type AG thread M10 bolt length 150mm steel black oxide finished PN: 65521002

     $46.20 Add to cart
  • Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) PN: 65521092
    Levelling Pads 2259 NG, Stainless SteelMachine Mounts, Rubber-Buffers, Dampers

    Leveling pad 2259 type NG thread M10 bolt length 150mm stainless steel 1.4301 (AISI 304) PN: 65521092

     $65.09 Add to cart
  • Adjustable clamping lever 300 version G with external thread M10 x 63mm lever length L1 = 78mm PN: 66578063
    Adjustable Clamping LeversAdjustable Clamping Levers 300, Version G with External ThreadParts for Operating

    Adjustable clamping lever 300 version G with external thread M10 x 63mm lever length L1 = 78mm PN: 66578063

     $17.15 Add to cart
  • Adjustable clamping lever 300.5 version IS-G with external thread M10x63mm lever length L1 = 78mm stainless steel PN: 66599744
    Adjustable Clamping LeversAdjustable Clamping Levers 300.5, Version IS-G with External Thread, StainlessParts for Operating

    Adjustable clamping lever 300.5 version IS-G with external thread M10x63mm lever length L1 = 78mm stainless steel PN: 66599744

     $59.75 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top