Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

17.0

  • Sprocket KRT 12 B-1 3/4x7/16" 95 teeth material cast iron for taper bush type 2517 PN: 10777183G
    Single-SprocketsSprocketsSprockets KRT for Taper BushesSprockets KRT for Taper Bushes, Pitch 3/4 x 7/16", ISO 12 B-1Sprockets, Chains, Accessories

    Sprocket KRT 12 B-1 3/4×7/16″ 95 teeth material cast iron for taper bush type 2517 PN: 10777183G

     $413.04 Add to cart
  • Spur gear made of polyketone die-cast with hub module 1 48 teeth tooth width 9mm outside diameter 50mm PN: 28304801
    Spur Gears Polyketone die-cast, Module 0.5 to 3Spur Gears Polyketone die-cast, Module 1Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyketone die-cast with hub module 1 48 teeth tooth width 9mm outside diameter 50mm PN: 28304801

     $7.63 Add to cart
  • Spur gear made of polyacetal resin die-cast with hub module 1.5 24 teeth tooth width 12mm outside diameter 39mm PN: 28502400
    Spur Gears Acetal Resin, die-cast, Module 0.5 to 3Spur Gears, Polyacetal, Module 1.5Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyacetal resin die-cast with hub module 1.5 24 teeth tooth width 12mm outside diameter 39mm PN: 28502400

     $6.24 Add to cart
  • Spur gear made of polyketone die-cast with hub module 1.5 25 teeth tooth width 12mm outside diameter 40,5mm PN: 28502501
    Spur Gears Polyketone die-cast, Module 0.5 to 3Spur Gears Polyketone die-cast, Module 1.5Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyketone die-cast with hub module 1.5 25 teeth tooth width 12mm outside diameter 40,5mm PN: 28502501

     $8.65 Add to cart
  • Spur gear made of POM with hub module 2 15 teeth tooth width 16mm outside diameter 34mm PN: 29601500
    Spur Gears POM white / nature, Milled Teeth, Module 0.5 to 3Spur Gears, POM, milled, Module 2Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of POM with hub module 2 15 teeth tooth width 16mm outside diameter 34mm PN: 29601500

     $16.02 Add to cart
  • Actuator MM 115 speed 1.5 mm/sec stroke 300 mm 3x 400V AC 50Hz PN: 47541502
    Gear Boxes and Geared MotorsLinear Actuators MM (Lifting Devices)Linear Actuators MM 115, Outside-Ø 115 mm, 3x 400V AC

    Actuator MM 115 speed 1.5 mm/sec stroke 300 mm 3x 400V AC 50Hz PN: 47541502

     $3,328.77 Add to cart
  • Clamp coupling (boc coupling) DIN 115 both sides bore 70mm with keyway material cast iron PN: 60007000
    Clamp Coupling DIN 115 - A, cast iron, with keywayCouplings, Friction Clutches, Safety CouplingsRigid, Two-Piece

    Clamp coupling (boc coupling) DIN 115 both sides bore 70mm with keyway material cast iron PN: 60007000

     $430.79 Add to cart
  • Feather key DIN 6885-1 version A 6 x 6 x 60 mm material C45 PN: 61813200
    Fastening ElementsFeather Keys (Parallel Keys) DIN 6885-1, Steel

    Feather key DIN 6885-1 version A 6 x 6 x 60 mm material C45 PN: 61813200

     $1.13 Add to cart
  • Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 80mm D10 material grey cast iron PN: 62018000
    Bearings, Bushes, SealsHeavy-Duty Pillow Block Bearings DIN 504 A, With Red Brass BushPillow Block Bearings

    Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 80mm D10 material grey cast iron PN: 62018000

     $584.50 Add to cart
  • Cardan joint UKM both sides bore 4mm ends with metal cap PN: 63023900
    Cardan Joint UKM, PlasticSingle Universal Joints in different modelsUniversal Joints

    Cardan joint UKM both sides bore 4mm ends with metal cap PN: 63023900

     $32.31 Add to cart
  • Cardan joint UKM both sides bore 6mm ends with metal cap PN: 63024000
    Cardan Joint UKM, PlasticSingle Universal Joints in different modelsUniversal Joints

    Cardan joint UKM both sides bore 6mm ends with metal cap PN: 63024000

     $30.73 Add to cart
  • Radial shaft seal type A with one sealing lip 45 x 62 x 7mm PN: 64790310
    Bearings, Bushes, SealsDIN 3760 - Radial Shaft Seals Design ARadial Shaft Seals DIN 3760 Design A, for Shaft Diameter 32 to 50 mm

    Radial shaft seal type A with one sealing lip 45 x 62 x 7mm PN: 64790310

     $7.84 Add to cart
  • Spring-action side thrust pin 2214 10 x 30 version A single-sided steel black oxided PN: 65493000
    Fastening ElementsSpring PlungersSpring-Action Side Thrust Pins 2214

    Spring-action side thrust pin 2214 10 x 30 version A single-sided steel black oxided PN: 65493000

     $18.60 Add to cart
  • Chain wheel, 40 teeth made of cast iron 20 DIN 766 outer diameter 500mm, for diameter 5/6 mm PN: 77124000
    Chain Wheels with Teeth, Pitch 18,5 mm, Chain Width 5 and 6 mmRound-Link Steel Chains and Chain WheelsSprockets, Chains, Accessories

    Chain wheel, 40 teeth made of cast iron 20 DIN 766 outer diameter 500mm, for diameter 5/6 mm PN: 77124000

     $461.33 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top