Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

2.47

  • Sprocket KRS with hub 12 B-1 3/4x7/16" 22 teeth material steel PN: 10712200
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 3/4 x 7/16", ISO 12 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 12 B-1 3/4×7/16″ 22 teeth material steel PN: 10712200

     $32.75 Add to cart
  • Triple-strand sprocket DRS with hub 12 B-3 3/4x7/16" 15 teeth material steel PN: 13711500
    SprocketsSprockets, Chains, AccessoriesTriple-SprocketsTriple-Sprockets DRS with One-Sided Hub, Pitch 3/4 x 7/16", ISO 12 B-3Triple-Strand Sprockets DRS, with One-Sided Hub

    Triple-strand sprocket DRS with hub 12 B-3 3/4×7/16″ 15 teeth material steel PN: 13711500

     $67.43 Add to cart
  • Timing belt pulley HTD 8M material steel 40 teeth for belt width 30mm PN: 17422000
    Pulleys HTD 8M, Belt Width 30 mmPulleys Profile HTDTiming Belts and Pulleys

    Timing belt pulley HTD 8M material steel 40 teeth for belt width 30mm PN: 17422000

     $57.89 Add to cart
  • Timing belt pulley H material steel 28 teeth for belt width 075=19.1mm PN: 18402800
    Pulleys H 075Pulleys Inch-ProfileTiming Belts and Pulleys

    Timing belt pulley H material steel 28 teeth for belt width 075=19.1mm PN: 18402800

     $49.45 Add to cart
  • Spur gear made of steel C45 with hub module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm PN: 23211045
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 2.5Spur Gears, Steel, Module 2.5, Tooth Width 25 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 2.5 45 teeth tooth width 25mm outside diameter 117.5mm PN: 23211045

     $115.44 Add to cart
  • Spur gear made of polyacetal resin die-cast with hub module 0.7 28 teeth tooth width 6mm outside diameter 21mm PN: 28202800
    Spur Gears Acetal Resin, die-cast, Module 0.5 to 3Spur Gears, Polyacetal, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyacetal resin die-cast with hub module 0.7 28 teeth tooth width 6mm outside diameter 21mm PN: 28202800

     $1.84 Add to cart
  • Parallel pin DIN 6325 hardened steel diameter 5m6 length 16mm PN: 61840516
    Fastening ElementsParallel Pins According to DIN 6325

    Parallel pin DIN 6325 hardened steel diameter 5m6 length 16mm PN: 61840516

     $0.29 Add to cart
  • Taper bush 3525 bore 90mm PN: 62250990
    Locking Assemblies, Clamping Bushes, Taper BushesTaper BushesTaper bushes 3525

    Taper bush 3525 bore 90mm PN: 62250990

     $70.50 Add to cart
  • Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with green paint PN: 64742000
    Linear Motion, Linear Bearings, Precision Rail GuidesPrecision Shaft Steel Material CF53, Hardened and GroundShaft Steel / Silver Steel

    Precision shaft steel CF53 hardened min. 59 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with green paint PN: 64742000

     $113.93 Add to cart
  • Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with yellow paint PN: 64799420
    Linear Motion, Linear Bearings, Precision Rail GuidesPrecision Shaft Steel Material Stainless Steel, Hardened and GroundShaft Steel / Silver Steel

    Precision shaft steel X90 stainless hardened min. 54 HRC and ground diameter 20h6 x 1000mm long cutting surface marked with yellow paint PN: 64799420

     $199.34 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top