Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

223

  • Plate wheel KRL without hub 083 1/2x3/16" 24 teeth material steel PN: 10322400
    Plate wheels KRL, Pitch 1/2 × 3/16", ISO 083Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 083 1/2×3/16″ 24 teeth material steel PN: 10322400

     $9.60 Add to cart
  • Rod end PF short version bore 20mm internal thread M16 right relubricateable PN: 63442000
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends PF with spherical roller bearing, short design, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end PF short version bore 20mm internal thread M16 right relubricateable PN: 63442000

     $184.35 Add to cart
  • Rod end PF short version bore 20mm internal thread M16 left relubricateable PN: 63447000
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends PF with spherical roller bearing, short design, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end PF short version bore 20mm internal thread M16 left relubricateable PN: 63447000

     $184.35 Add to cart
  • Angle joint DIN 71802 type C size 19 thread M14x1.5 right with nut steel zinc-plated with mounted sealing cap PN: 63643400
    Angle Joints DIN 71802Angle Joints DIN 71802, Steel Zinc-Plated, with mounted Sealing CapRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Angle joint DIN 71802 type C size 19 thread M14x1.5 right with nut steel zinc-plated with mounted sealing cap PN: 63643400

     $21.70 Add to cart
  • Angle joint DIN 71802 type C size 19 thread M14x1.5 left with nut steel zinc-plated with mounted sealing cap PN: 63653400
    Angle Joints DIN 71802Angle Joints DIN 71802, Steel Zinc-Plated, with mounted Sealing CapRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Angle joint DIN 71802 type C size 19 thread M14x1.5 left with nut steel zinc-plated with mounted sealing cap PN: 63653400

     $18.31 Add to cart
  • Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut steel zinc-plated with mounted sealing cap PN: 63663400
    Angle Joints DIN 71802Angle Joints DIN 71802, Steel Zinc-Plated, with mounted Sealing CapRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut steel zinc-plated with mounted sealing cap PN: 63663400

     $17.59 Add to cart
  • Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut steel zinc-plated with mounted sealing cap PN: 63673400
    Angle Joints DIN 71802Angle Joints DIN 71802, Steel Zinc-Plated, with mounted Sealing CapRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut steel zinc-plated with mounted sealing cap PN: 63673400

     $18.38 Add to cart
  • Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut stainless steel 1.4301 with mounted sealing cap PN: 63699634
    Angle Joints DIN 71802Angle Joints DIN 71802, Stainless Steel, with mounted Sealing CapRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 right with nut stainless steel 1.4301 with mounted sealing cap PN: 63699634

     $72.17 Add to cart
  • Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut stainless steel 1.4301 with mounted sealing cap PN: 63699734
    Angle Joints DIN 71802Angle Joints DIN 71802, Stainless Steel, with mounted Sealing CapRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Angle joint DIN 71802 type CS with safety circlip size 19 thread M14x1.5 left with nut stainless steel 1.4301 with mounted sealing cap PN: 63699734

     $76.73 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top