Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

2,30

  • Sprocket KRS with hub pitch 8mm 34 teeth material steel PN: 10083400
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 8mm, ISO 05 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub pitch 8mm 34 teeth material steel PN: 10083400

     $15.83 Add to cart
  • Sprocket KRS with hub 06 B-1 3/8x7/32" 18 teeth material steel PN: 10111800
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 3/8 × 7/32", ISO 06 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 06 B-1 3/8×7/32″ 18 teeth material steel PN: 10111800

     $9.20 Add to cart
  • Sprocket KRG with hub 06 B-1 3/8x7/32" 18 teeth material steel teeth induction hardened PN: 10188118
    Single-SprocketsSprocketsSprockets KRG, Teeth induction hardenedSprockets KRG, teeth induction hardened, Pitch 3/8 x 7/32", ISO 06 B-1Sprockets, Chains, Accessories

    Sprocket KRG with hub 06 B-1 3/8×7/32″ 18 teeth material steel teeth induction hardened PN: 10188118

     $11.75 Add to cart
  • Plate wheel KRL without hub 08 B-1 1/2x5/16" 19 teeth material steel PN: 10521900
    Plate wheels KRL, Pitch 1/2 x 5/16", ISO 08 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 08 B-1 1/2×5/16″ 19 teeth material steel PN: 10521900

     $7.57 Add to cart
  • Sprocket KRG with hub 10 B-1 5/8x3/8" 10 teeth material steel teeth induction hardened PN: 10688110
    Single-SprocketsSprocketsSprockets KRG, Teeth induction hardenedSprockets KRG, teeth induction hardened, Pitch 5/8 x 3/8", ISO 10 B-1Sprockets, Chains, Accessories

    Sprocket KRG with hub 10 B-1 5/8×3/8″ 10 teeth material steel teeth induction hardened PN: 10688110

     $11.80 Add to cart
  • BALLISTOL Copper-Graphite-Spray 200ml 25200 (Actual safety data sheet on the internet in the section Downloads) PN: 14070164
    BALLISTOL® 25200 Copper-Graphite-SprayBALLISTOL® ProductsX-TRA Adhesives, Sealants and Lubrication

    BALLISTOL Copper-Graphite-Spray 200ml 25200 (Actual safety data sheet on the internet in the section Downloads) PN: 14070164

     $10.71 Add to cart
  • Flange for timing belt pulley thickness 2.5mm Ø 256 x 247 x 225mm steel zinc plated PN: 16010416
    Flanges for Timing Belt Pulleys, SteelTiming Belts and Pulleys

    Flange for timing belt pulley thickness 2.5mm Ø 256 x 247 x 225mm steel zinc plated PN: 16010416

     $87.75 Add to cart
  • Timing belt pulley T5 material aluminium 36 teeth for belt width 25mm 36 T5/36-2 PN: 16243600
    Pulleys Profile TPulleys T5, Belt Width 25 mmTiming Belts and Pulleys

    Timing belt pulley T5 material aluminium 36 teeth for belt width 25mm 36 T5/36-2 PN: 16243600

     $24.26 Add to cart
  • Timing belt pulley AT3 material aluminium 84 teeth for belt width 10 mm 21 AT3/84-0 PN: 16338400
    Pulleys AT3, Belt Width 10 mmPulleys Profile ATTiming Belts and Pulleys

    Timing belt pulley AT3 material aluminium 84 teeth for belt width 10 mm 21 AT3/84-0 PN: 16338400

     $47.51 Add to cart
  • Timing belt pulley AT5 material aluminium 36 teeth for belt width 25mm 36 AT5/36-2 PN: 16643600
    Pulleys AT5, Belt Width 25 mmPulleys Profile ATTiming Belts and Pulleys

    Timing belt pulley AT5 material aluminium 36 teeth for belt width 25mm 36 AT5/36-2 PN: 16643600

     $26.21 Add to cart
  • Spur gear made of steel C45 with hub module 1 46 teeth tooth width 15mm outside diameter 48mm PN: 21411046
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1Spur Gears, Steel, Module 1, Tooth Width 15 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1 46 teeth tooth width 15mm outside diameter 48mm PN: 21411046

     $27.27 Add to cart
  • Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 17mm outside diameter 45mm PN: 21811028
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.5Spur Gears, Steel, Module 1.5, Tooth Width 17 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1.5 28 teeth tooth width 17mm outside diameter 45mm PN: 21811028

     $28.84 Add to cart
  • spur gear POM black with hub module 2 45 teeth tooth width 20mm outer diameter 94mm PN: 29611045
    Spur Gears POM black, Milled Teeth, Module 1 to 3Spur Gears, POM black, milled, Module 2Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    spur gear POM black with hub module 2 45 teeth tooth width 20mm outer diameter 94mm PN: 29611045

     $55.95 Add to cart
  • Bevel gear made of steel module 2.5 20 teeth i=1.5:1 milled PN: 36115200
    Bevel GearsBevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1Bevel Gears, Steel, Straight Tooth System, ratio 1.5:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of steel module 2.5 20 teeth i=1.5:1 milled PN: 36115200

     $52.44 Add to cart
  • Miniature Bevel gearbox MKU, type K, size 035, type 10, gear ratio 1:1 PN: 41203511
    Bevel GearboxesBevel Gearboxes MKU, Model K, up to 16 Nm, i=1:1 up to 4:1Gear Boxes and Geared MotorsMiniature Bevel Gearboxes MKU, Model K, i= 1:1

    Miniature Bevel gearbox MKU, type K, size 035, type 10, gear ratio 1:1 PN: 41203511

     $409.23 Add to cart
  • Miniature Bevel gearbox MKU, type L, size 035, type 30, gear ratio 1:1 PN: 41203531
    Bevel GearboxesBevel Gearboxes MKU, Model L, up to 16 Nm, i=1:1 up to 4:1Gear Boxes and Geared MotorsMiniature Bevel Gearboxes MKU, Model L, i= 1:1

    Miniature Bevel gearbox MKU, type L, size 035, type 30, gear ratio 1:1 PN: 41203531

     $409.23 Add to cart
  • Trapezoidal threaded spindle Tr.10x3x383mm length for stroke 300mm for linear drive SFL PN: 47520130
    Gear Boxes and Geared MotorsLinear Drives (lifting devices) SFL, 12 V - 24 V, up to 2.100 NSpindles for linear drives (lifting devices) SFL

    Trapezoidal threaded spindle Tr.10x3x383mm length for stroke 300mm for linear drive SFL PN: 47520130

     $25.62 Add to cart
  • single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm PN: 51111-MAE
    Ball Bearings / Roller BearingsBearings, Bushes, SealsThrust Ball Bearings, Single Direction, Single Row, MAEDLER®

    single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm PN: 51111-MAE

     $13.02 Add to cart
  • SKF single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm PN: 51111-SKF
    Ball Bearings / Roller BearingsBearings, Bushes, SealsThrust Ball Bearings, Single Direction, Single Row, SKF®

    SKF single direction thrust ball bearing 51111 inner Ø 55mm outer Ø 78mm height 16mm PN: 51111-SKF

     $56.09 Add to cart
  • Shoulder screw similar to ISO 7379 ø20f9-M16-55mm steel tensile strength class 12.9 PN: 619720055
    Fastening ElementsSocket Shoulder Screws similar ISO 7379, Steel strength 12.9

    Shoulder screw similar to ISO 7379 ø20f9-M16-55mm steel tensile strength class 12.9 PN: 619720055

     $10.40 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top