Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

247

  • Timing belt pulley T10 material aluminium 19 teeth for belt width 25mm 40 T10/19-2 PN: 16431900
    Pulleys Profile TPulleys T10, Belt Width 25 mmTiming Belts and Pulleys

    Timing belt pulley T10 material aluminium 19 teeth for belt width 25mm 40 T10/19-2 PN: 16431900

     $25.39 Add to cart
  • Timing belt pulley AT10 material aluminium 19 teeth for belt width 25mm 40 AT10/19-2 PN: 16831900
    Pulleys AT10, Belt Width 25 mmPulleys Profile ATTiming Belts and Pulleys

    Timing belt pulley AT10 material aluminium 19 teeth for belt width 25mm 40 AT10/19-2 PN: 16831900

     $26.58 Add to cart
  • Membrane coupling MEM with clamping hub bore both sides 16mm max. torque 30Nm PN: 60172500
    Couplings, Friction Clutches, Safety CouplingsMembrane Coupling MEM, Clamp StyleTorsionally Stiff, Angular Flexibility, Transversal Flexibility, Longitudinal Flexibility

    Membrane coupling MEM with clamping hub bore both sides 16mm max. torque 30Nm PN: 60172500

     $448.83 Add to cart
  • Membrane coupling MEM with clamping hub bore both sides 20mm max. torque 30Nm PN: 60172600
    Couplings, Friction Clutches, Safety CouplingsMembrane Coupling MEM, Clamp StyleTorsionally Stiff, Angular Flexibility, Transversal Flexibility, Longitudinal Flexibility

    Membrane coupling MEM with clamping hub bore both sides 20mm max. torque 30Nm PN: 60172600

     $449.17 Add to cart
  • Bush similar to DIN 1850-3 J sintered bronze bore 55mm outer diameter 65mm length 40mm PN: 62338200
    Bearings, Bushes, SealsBushesBushes Sintered Bronze, Similar to DIN 1850-3 (DIN 4379 Version C)

    Bush similar to DIN 1850-3 J sintered bronze bore 55mm outer diameter 65mm length 40mm PN: 62338200

     $60.93 Add to cart
  • Mating piece for clevis joint DIN 71752 size 14 x 28 internal thread M14 steel zinc plated PN: 63761300
    Clevis Joints DIN 71752 (ex DIN 71751)Mating Pieces for Clevis joints, with internal thread, zinc-platedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Mating piece for clevis joint DIN 71752 size 14 x 28 internal thread M14 steel zinc plated PN: 63761300

     $19.96 Add to cart
  • Leveling pad 2259 type AG thread M12 bolt length 150mm steel black oxide finished PN: 65521202
    Levelling Pads 2259 AG, Steel, black oxide finishMachine Mounts, Rubber-Buffers, Dampers

    Leveling pad 2259 type AG thread M12 bolt length 150mm steel black oxide finished PN: 65521202

     $54.85 Add to cart
  • Leveling pad 2259 type NG thread M12 bolt length 150mm stainless steel 1.4301 (AISI 304) PN: 65521292
    Levelling Pads 2259 NG, Stainless SteelMachine Mounts, Rubber-Buffers, Dampers

    Leveling pad 2259 type NG thread M12 bolt length 150mm stainless steel 1.4301 (AISI 304) PN: 65521292

     $76.31 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top