Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

257

  • Spur gear made of steel C45 with hub module 2 23 teeth tooth width 16mm outside diameter 50mm PN: 23102300
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 2Spur Gears, Steel, Module 2, Tooth Width 16 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 2 23 teeth tooth width 16mm outside diameter 50mm PN: 23102300

     $31.08 Add to cart
  • Spur gear made of polyketone die-cast with hub module 3 50 teeth tooth width 19mm outside diameter 156mm PN: 28805001
    Spur Gears Polyketone die-cast, Module 0.5 to 3Spur Gears Polyketone die-cast, Module 3Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyketone die-cast with hub module 3 50 teeth tooth width 19mm outside diameter 156mm PN: 28805001

     $73.56 Add to cart
  • locknut KMM splitted with clamp screw size 10 M50x1,5 steel zinc-plated PN: 65242400K
    Fastening ElementsLocknuts KMM, Single-Splitted, with Clamp Screw, zinc-platedLocknuts, Shaftnuts

    locknut KMM splitted with clamp screw size 10 M50x1,5 steel zinc-plated PN: 65242400K

     $25.13 Add to cart
  • locknut KMMR splitted with clamp screw size 10 M50x1,5 Material stainless steel PN: 65299424K
    Fastening ElementsLocknuts KMMR, Single-Splitted, with Clamp Screw, Stainless SteelLocknuts, Shaftnuts

    locknut KMMR splitted with clamp screw size 10 M50x1,5 Material stainless steel PN: 65299424K

     $48.79 Add to cart
  • Nut DIN 508 long for T-slot 22mm DIN 650 thread M20 quality 10 PN: 65512022L
    Fastening ElementsNuts similar to DIN 508 for Tee Slots DIN 650, long Version, blackT-Nuts DIN 508 for Tee Slots DIN 650 / ISO 299

    Nut DIN 508 long for T-slot 22mm DIN 650 thread M20 quality 10 PN: 65512022L

     $13.56 Add to cart
  • Clamping lever 202 TG diameter 32mm material malleable cast iron PN: 66531600
    Clamp NutsClamping Levers 202 TG, Cast SteelParts for Operating

    Clamping lever 202 TG diameter 32mm material malleable cast iron PN: 66531600

     $23.08 Add to cart
  • Profile damper TA 72-31 diameter 72mm thread M16 PN: 69107200
    Machine Mounts, Rubber-Buffers, DampersProfile Damper TA Axial Damping

    Profile damper TA 72-31 diameter 72mm thread M16 PN: 69107200

     $154.19 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top