Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

2,67

  • Sprocket KRS with hub pitch 8mm 38 teeth material steel PN: 10083800
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 8mm, ISO 05 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub pitch 8mm 38 teeth material steel PN: 10083800

     $15.49 Add to cart
  • Plate wheel KRL without hub 06 B-1 3/8x7/32" 32 teeth material steel PN: 10123200
    Plate wheels KRL, Pitch 3/8 × 7/32", ISO 06 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 06 B-1 3/8×7/32″ 32 teeth material steel PN: 10123200

     $9.40 Add to cart
  • Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 24 teeth material steel PN: 12012400
    Double-SprocketsDouble-Sprockets ZRS with One-Sided Hub, Pitch 8 mm , ISO 05 B-2Double-Sprockets ZRS with One-Sided Hub, pre-boredSprocketsSprockets, Chains, Accessories

    Double-strand sprocket ZRS with hub 05 B-2 pitch 8mm 24 teeth material steel PN: 12012400

     $19.48 Add to cart
  • Timing belt pulley HTD 5M material steel 32 teeth for belt width 9mm PN: 17223200
    Pulleys HTD 5M, Belt Width 9 mmPulleys Profile HTDTiming Belts and Pulleys

    Timing belt pulley HTD 5M material steel 32 teeth for belt width 9mm PN: 17223200

     $18.93 Add to cart
  • Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 10mm outside diameter 66mm PN: 21704200
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.5Spur Gears, Steel, Module 1.5, Tooth Width 10 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1.5 42 teeth tooth width 10mm outside diameter 66mm PN: 21704200

     $53.87 Add to cart
  • Spur gear made of steel C45 without hub module 1.25 54 teeth tooth width 10mm outside diameter 70mm PN: 22605400
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.25Spur Gears, Steel, Module 1.25, Tooth Width 10 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 1.25 54 teeth tooth width 10mm outside diameter 70mm PN: 22605400

     $49.34 Add to cart
  • Spur gear made of steel C45 without hub module 1.5 37 teeth tooth width 15mm outside diameter 58.5mm PN: 22803700
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.5Spur Gears, Steel, Module 1.5, Tooth Width 15 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 1.5 37 teeth tooth width 15mm outside diameter 58.5mm PN: 22803700

     $53.87 Add to cart
  • Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 right == Initial lubrication required before use == PN: 63221800
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 right == Initial lubrication required before use == PN: 63221800

     $55.72 Add to cart
  • Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left == Initial lubrication required before use == PN: 63231800
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M18x1.5 left == Initial lubrication required before use == PN: 63231800

     $55.69 Add to cart
  • Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 right maintenance-free PN: 63281800
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 right maintenance-free PN: 63281800

     $50.23 Add to cart
  • Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 left maintenance-free PN: 63291800
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K external thread M18x1.5 left maintenance-free PN: 63291800

     $50.23 Add to cart
  • Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 right maintenance-free stainless steel PN: 63299818
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT-R DIN ISO 12240-4, K, stainless steel, maintenance-freeRod ends GT-R DIN ISO 12240-4,K,Stainless Steel,maintenance-free,external thraedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 right maintenance-free stainless steel PN: 63299818

     $120.89 Add to cart
  • Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 left maintenance-free stainless steel PN: 63299918
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT-R DIN ISO 12240-4, K, stainless steel, maintenance-freeRod ends GT-R DIN ISO 12240-4,K,Stainless Steel,maintenance-free,external thraedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT-R DIN ISO 12240-4 series K external thread M18x1,5 left maintenance-free stainless steel PN: 63299918

     $120.89 Add to cart
  • Rubber buffer GH ø 80mm height 60mm with through hole 21mm PN: 68578060
    Machine Mounts, Rubber-Buffers, DampersRubber Buffers GH

    Rubber buffer GH ø 80mm height 60mm with through hole 21mm PN: 68578060

     $13.73 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top