Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

2,78

  • LIQUI MOLY Silicone Spray 300ml 3310 (Actual safety data sheet on the internet in the section Downloads) PN: 14070206
    LIQUI MOLY 3310 Silicone SprayLiqui Moly Products from MAEDLER catalogue 43X-TRA Adhesives, Sealants and Lubrication

    LIQUI MOLY Silicone Spray 300ml 3310 (Actual safety data sheet on the internet in the section Downloads) PN: 14070206

     $19.27 Add to cart
  • Spur gear made of steel C45 without hub module 1.25 55 teeth tooth width 10mm outside diameter 71.25mm PN: 22605500
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.25Spur Gears, Steel, Module 1.25, Tooth Width 10 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 1.25 55 teeth tooth width 10mm outside diameter 71.25mm PN: 22605500

     $49.43 Add to cart
  • Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 right with spherical ball bearing PN: 63241800
    Rod ends BR DIN ISO 12240-4, K, with spherical roller bearingRod ends BR DIN ISO 12240-4,K,with spherical roller bearing,with internal threadRod Ends DIN ISO 12240 (ex DIN 648)Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 right with spherical ball bearing PN: 63241800

     $134.91 Add to cart
  • Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 left with spherical ball bearing PN: 63246800
    Rod ends BR DIN ISO 12240-4, K, with spherical roller bearingRod ends BR DIN ISO 12240-4,K,with spherical roller bearing,with internal threadRod Ends DIN ISO 12240 (ex DIN 648)Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end BR DIN ISO 12240-4 series K internal thread M18x1.5 left with spherical ball bearing PN: 63246800

     $134.86 Add to cart
  • Lifting pin self-locking bolt diameter 12mm l1=50mm PN: 66691250
    Lifting Pins, Self LockingParts for Operating

    Lifting pin self-locking bolt diameter 12mm l1=50mm PN: 66691250

     $112.47 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top