Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

3.26

  • Roller chain with bent attachments 16 B-1-K2 2xp attachments wide version on one side PN: 10800021
    Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Roller Chains with Bent AtachmentsRoller Chains with Bent Attachments K2 = Wide Version, 2 x p, One-SidedSprockets, Chains, Accessories

    Roller chain with bent attachments 16 B-1-K2 2xp attachments wide version on one side PN: 10800021

     $71.27 Add to cart
  • Roller chain with bent attachments 16 B-1-K2 4xp attachments wide version on one side PN: 10800023
    Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Roller Chains with Bent AtachmentsRoller Chains with Bent Attachments K2 = Wide Version, 4 x p, One-SidedSprockets, Chains, Accessories

    Roller chain with bent attachments 16 B-1-K2 4xp attachments wide version on one side PN: 10800023

     $68.89 Add to cart
  • Roller chain with bent attachments 16 B-1-K2 6xp attachments wide version on one side PN: 10800025
    Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Roller Chains with Bent AtachmentsRoller Chains with Bent Attachments K2 = Wide Version, 6 x p, One-SidedSprockets, Chains, Accessories

    Roller chain with bent attachments 16 B-1-K2 6xp attachments wide version on one side PN: 10800025

     $66.27 Add to cart
  • Spur gear made of steel C45 with hub module 3 45 teeth tooth width 25mm outside diameter 141mm PN: 23304500
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 3Spur Gears, Steel, Module 3, Tooth Width 25 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 3 45 teeth tooth width 25mm outside diameter 141mm PN: 23304500

     $178.17 Add to cart
  • Spur gear made of polyacetal resin die-cast with hub module 1 18 teeth tooth width 9mm outside diameter 20mm PN: 28301800
    Spur Gears Acetal Resin, die-cast, Module 0.5 to 3Spur Gears, Polyacetal, Module 1Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of polyacetal resin die-cast with hub module 1 18 teeth tooth width 9mm outside diameter 20mm PN: 28301800

     $3.44 Add to cart
  • drill bushing (guide bushing) similar DIN 179 - A 4 x 16 PN: 62220416
    Bearings, Bushes, SealsBushesCylindrical Drill Bushes DIN 179 A

    drill bushing (guide bushing) similar DIN 179 – A 4 x 16 PN: 62220416

     $5.99 Add to cart
  • Ready-to-install flange nut Tr.60 x 9 single-start right material red brass PN: 64477160
    DIN103 - Trapezoidal Spindles and Nuts, single thread, right handReady-to-install Flanged Nut, single thread, right hand, red brassTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Ready-to-install flange nut Tr.60 x 9 single-start right material red brass PN: 64477160

     $504.47 Add to cart
  • Ready-to-install flange nut Tr.60 x 9 single-start left material red brass PN: 64477460
    DIN103 - Trapezoidal Spindles and Nuts, single thread, left handReady-to-install Flanged Nut, single thread, left hand, red brassTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Ready-to-install flange nut Tr.60 x 9 single-start left material red brass PN: 64477460

     $519.21 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top