Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

4.2

  • Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=125:1 output speed approx. 22 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406125
    Gear Boxes and Geared MotorsWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm

    Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=125:1 output speed approx. 22 rpm permitted Md2=7.8Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406125

     $613.19 Add to cart
  • Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=250:1 output speed approx. 11 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406250
    Gear Boxes and Geared MotorsWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm

    Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=250:1 output speed approx. 11 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406250

     $613.19 Add to cart
  • Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=400:1 output speed approx. 7 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406400
    Gear Boxes and Geared MotorsWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm

    Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=400:1 output speed approx. 7 rpm permitted Md2=7.4Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406400

     $613.19 Add to cart
  • Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406750
    Gear Boxes and Geared MotorsWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm

    Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=750:1 output speed approx. 3.7 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406750

     $613.19 Add to cart
  • Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1250:1 output speed approx. 2.2 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406990
    Gear Boxes and Geared MotorsWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm

    Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1250:1 output speed approx. 2.2 rpm permitted Md2=6.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406990

     $613.19 Add to cart
  • Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406992
    Gear Boxes and Geared MotorsWorm Geared Motors 230/400 V, up to 351 NmWorm Geared Motors RL, up to 7.8 Nm, 0.9 to 224 rpm

    Worm geared motor RL 120 Watt 230/400V 50Hz IE2 i=1500:1 output speed approx. 1.9 rpm permitted Md2=7.1Nm (For operating instructions please visit the download area of our website www.maedler.de) PN: 43406992

     $613.19 Add to cart
  • Actuator MM 60 speed 5.5 mm/sec stroke 300 mm 24V DC PN: 47536006
    Gear Boxes and Geared MotorsLinear Actuators MM (Lifting Devices)Linear Actuators MM 60, Outside-Ø 60 mm, 24V DC or 1x 230V AC

    Actuator MM 60 speed 5.5 mm/sec stroke 300 mm 24V DC PN: 47536006

     $1,944.14 Add to cart
  • Actuator MM 60 speed 2.7 mm/sec stroke 300 mm 1x 230V AC 50Hz PN: 47536026
    Gear Boxes and Geared MotorsLinear Actuators MM (Lifting Devices)Linear Actuators MM 60, Outside-Ø 60 mm, 24V DC or 1x 230V AC

    Actuator MM 60 speed 2.7 mm/sec stroke 300 mm 1x 230V AC 50Hz PN: 47536026

     $1,516.27 Add to cart
  • Clamp coupling (boc coupling) DIN 115 both sides bore 30mm with keyway material cast iron PN: 60003000
    Clamp Coupling DIN 115 - A, cast iron, with keywayCouplings, Friction Clutches, Safety CouplingsRigid, Two-Piece

    Clamp coupling (boc coupling) DIN 115 both sides bore 30mm with keyway material cast iron PN: 60003000

     $126.09 Add to cart
  • Feather key DIN 6885-1 version A 6 x 6 x 15 mm material C45 PN: 61811900
    Fastening ElementsFeather Keys (Parallel Keys) DIN 6885-1, Steel

    Feather key DIN 6885-1 version A 6 x 6 x 15 mm material C45 PN: 61811900

     $1.19 Add to cart
  • Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 40mm D10 material grey cast iron PN: 62014000
    Bearings, Bushes, SealsHeavy-Duty Pillow Block Bearings DIN 504 A, With Red Brass BushPillow Block Bearings

    Heavy-duty pillow block bearing DIN 504 A with red brass bush bore 40mm D10 material grey cast iron PN: 62014000

     $211.63 Add to cart
  • Heavy-duty pillow block bearing DIN 504 B without bush bore 45mm D7 material grey cast iron PN: 62024500
    Bearings, Bushes, SealsHeavy-Duty Pillow Block Bearings DIN 504 B, Without BushPillow Block Bearings

    Heavy-duty pillow block bearing DIN 504 B without bush bore 45mm D7 material grey cast iron PN: 62024500

     $118.95 Add to cart
  • Heavy-duty pillow block bearing DIN 504 B without bush bore 50mm D7 material grey cast iron PN: 62025000
    Bearings, Bushes, SealsHeavy-Duty Pillow Block Bearings DIN 504 B, Without BushPillow Block Bearings

    Heavy-duty pillow block bearing DIN 504 B without bush bore 50mm D7 material grey cast iron PN: 62025000

     $118.65 Add to cart
  • Flange bearing DIN 502 A with red brass bush bore 50mm D10 material grey cast iron PN: 62105000
    Bearings, Bushes, SealsFlange Bearing DIN 502 A, With Red Brass BushFlange Bearings

    Flange bearing DIN 502 A with red brass bush bore 50mm D10 material grey cast iron PN: 62105000

     $380.20 Add to cart
  • Bush BP bore 16mm polyamide 6.6 outer diameter 24mm length 15mm PN: 62372700
    Bearings, Bushes, SealsBushesBushes BP, Polyamide, up to 80°C

    Bush BP bore 16mm polyamide 6.6 outer diameter 24mm length 15mm PN: 62372700

     $3.65 Add to cart
  • Bush BP bore 28mm polyamide 6.6 outer diameter 32mm length 20mm PN: 62374600
    Bearings, Bushes, SealsBushesBushes BP, Polyamide, up to 80°C

    Bush BP bore 28mm polyamide 6.6 outer diameter 32mm length 20mm PN: 62374600

     $3.93 Add to cart
  • Rod end igus igubal KCRM-06 internal thread M6 right PN: 63255606
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle JointsThermoplastic Rod Ends igubal® KCRM and KCLM

    Rod end igus igubal KCRM-06 internal thread M6 right PN: 63255606

     $10.51 Add to cart
  • Rod end igus igubal KCLM-06 internal thread M6 left PN: 63255706
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle JointsThermoplastic Rod Ends igubal® KCRM and KCLM

    Rod end igus igubal KCLM-06 internal thread M6 left PN: 63255706

     $10.51 Add to cart
  • Clevis joint similar DIN 71752 size 5 x 10 type KL right handed aluminum black anodized PN: 63766003
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints similar to DIN 71752, Aluminium, KLRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint similar DIN 71752 size 5 x 10 type KL right handed aluminum black anodized PN: 63766003

     $3.09 Add to cart
  • Clevis joint similar DIN 71752 size 5 x 10 type SL right handed aluminum black anodized PN: 63766403
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints similar to DIN 71752, Aluminium, SLRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint similar DIN 71752 size 5 x 10 type SL right handed aluminum black anodized PN: 63766403

     $3.09 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top