Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

76

  • Timing belt pulley T5 material aluminium 24 teeth for belt width 16mm 27 T5/24-2 PN: 16232400
    Pulleys Profile TPulleys T5, Belt Width 16 mmTiming Belts and Pulleys

    Timing belt pulley T5 material aluminium 24 teeth for belt width 16mm 27 T5/24-2 PN: 16232400

     $13.52 Add to cart
  • Timing belt pulley T10 material aluminium 12 teeth for belt width 16mm 31 T10/12-2 PN: 16421200
    Pulleys Profile TPulleys T10, Belt Width 16 mmTiming Belts and Pulleys

    Timing belt pulley T10 material aluminium 12 teeth for belt width 16mm 31 T10/12-2 PN: 16421200

     $12.50 Add to cart
  • Timing belt pulley AT5 material aluminium 24 teeth for belt width 16mm 27 AT5/24-2 PN: 16632400
    Pulleys AT5, Belt Width 16 mmPulleys Profile ATTiming Belts and Pulleys

    Timing belt pulley AT5 material aluminium 24 teeth for belt width 16mm 27 AT5/24-2 PN: 16632400

     $13.71 Add to cart
  • Gear rack made of polyacetal resin die-cast module 3 tooth width 19.4mm height 15mm length 250mm PN: 28860100
    Gear Racks, Polyacetal Die-Cast, Module 0.5 to 3Spur Gears, Toothed Racks, Internal Gears, Ratchet WheelsSquare Gear Racks, Straight Tooth System

    Gear rack made of polyacetal resin die-cast module 3 tooth width 19.4mm height 15mm length 250mm PN: 28860100

     $21.44 Add to cart
  • Precision worm centre distance 35mm i=15 PN: 32211500
    Bevel Gears, Worm Wheels, WormsCentre Distance in Casing 35 mm + 0,05Precision Worm-Gear SetsWorms - Centre Distance in Casing 35 mm + 0,05Worms, Worm Wheels, Worm Shafts

    Precision worm centre distance 35mm i=15 PN: 32211500

     $78.81 Add to cart
  • Bevel gear made of brass Ms58 module 1 50 teeth i=1:1 milled PN: 35053200
    Bevel GearsBevel Gears Made of Brass, Ratio 1:1 - 4:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of brass Ms58 module 1 50 teeth i=1:1 milled PN: 35053200

     $72.35 Add to cart
  • Bevel gear made of steel module 2 16 teeth i=2.5:1 milled PN: 36106400
    Bevel GearsBevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1Bevel Gears, Steel, Straight Tooth System, ratio 2.5:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of steel module 2 16 teeth i=2.5:1 milled PN: 36106400

     $61.84 Add to cart
  • Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199305
    Couplings, Friction Clutches, Safety CouplingsTorsionally Stiff, Transversal FlexibilityTorsionally-Stiff Couplings HZD with through hole, setscrew-style, Stainless

    Torsionally-stiff coupling HZD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199305

     $47.07 Add to cart
  • Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199306
    Couplings, Friction Clutches, Safety CouplingsTorsionally Stiff, Transversal FlexibilityTorsionally-Stiff Couplings HZD with through hole, setscrew-style, Stainless

    Torsionally-stiff coupling HZD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199306

     $47.07 Add to cart
  • Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199307
    Couplings, Friction Clutches, Safety CouplingsTorsionally Stiff, Transversal FlexibilityTorsionally-Stiff Couplings HZD with through hole, setscrew-style, Stainless

    Torsionally-stiff coupling HZD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199307

     $47.07 Add to cart
  • Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199407
    Couplings, Friction Clutches, Safety CouplingsTorsionally Stiff, Transversal FlexibilityTorsionally-Stiff Couplings HFD with through hole, with clamp hubs, Stainless

    Torsionally-stiff coupling HFD with through hole bore 6mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199407

     $52.78 Add to cart
  • Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199408
    Couplings, Friction Clutches, Safety CouplingsTorsionally Stiff, Transversal FlexibilityTorsionally-Stiff Couplings HFD with through hole, with clamp hubs, Stainless

    Torsionally-stiff coupling HFD with through hole bore 8mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199408

     $52.88 Add to cart
  • Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199409
    Couplings, Friction Clutches, Safety CouplingsTorsionally Stiff, Transversal FlexibilityTorsionally-Stiff Couplings HFD with through hole, with clamp hubs, Stainless

    Torsionally-stiff coupling HFD with through hole bore 10mm max. torque 4.0 Nm outside diameter 25.4mm stainless steel 1.4305 PN: 60199409

     $52.78 Add to cart
  • Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm PN: 60273000
    Couplings, Friction Clutches, Safety CouplingsSelf-Aligning Couplings KA, Short Version, AluminiumTorsionally Rigid, Angular Flexibility, Transversal Flexibility

    Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 10mm PN: 60273000

     $42.08 Add to cart
  • Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm PN: 60273200
    Couplings, Friction Clutches, Safety CouplingsSelf-Aligning Couplings KA, Short Version, AluminiumTorsionally Rigid, Angular Flexibility, Transversal Flexibility

    Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 12mm PN: 60273200

     $42.08 Add to cart
  • Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm PN: 60273400
    Couplings, Friction Clutches, Safety CouplingsSelf-Aligning Couplings KA, Short Version, AluminiumTorsionally Rigid, Angular Flexibility, Transversal Flexibility

    Beam coupling KA made from aluminium max. torque 6.0 Nm overall length 44.45mm outer diameter 31.75mm both sides bore 16mm PN: 60273400

     $42.08 Add to cart
  • locking assembly TMK type A bore 14mm steel PN: 61550214
    Locking Assemblies TMK Type A, boreholes 5 - 45 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    locking assembly TMK type A bore 14mm steel PN: 61550214

     $31.81 Add to cart
  • locking assembly TMK type B bore 14mm steel zinc/nickel plated PN: 61558214
    Locking Assemblies TMK Type B, with corrosion protection, boreholes 5 - 45 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    locking assembly TMK type B bore 14mm steel zinc/nickel plated PN: 61558214

     $37.92 Add to cart
  • Flange block bearing igus igubal EFSM-25 4 mounting holes bore 25mm PN: 62155025
    Bearings, Bushes, SealsFlange BearingsThermoplastic Flange Bearings igubal® EFSM

    Flange block bearing igus igubal EFSM-25 4 mounting holes bore 25mm PN: 62155025

     $33.63 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type GA PN: 62341500GA
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type GA, Steel, black oxide finish

    Clamp collar double-split steel C45 black oxide finished bore 15mm with bolts DIN 912 12.9 type GA PN: 62341500GA

     $19.46 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top