Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

77

  • Sprocket KRS with hub pitch 5mm 31 teeth material steel PN: 10033100
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 5 mm, ISO 03Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub pitch 5mm 31 teeth material steel PN: 10033100

     $20.81 Add to cart
  • Triple-strand sprocket DRS with hub 16 B-3 1"x17.02mm 95 teeth material cast iron PN: 13818300
    SprocketsSprockets, Chains, AccessoriesTriple-SprocketsTriple-Sprockets DRS with One-Sided Hub, Pitch 1" x 17,02 mm, ISO 16 B-3Triple-Strand Sprockets DRS, with One-Sided Hub

    Triple-strand sprocket DRS with hub 16 B-3 1″x17.02mm 95 teeth material cast iron PN: 13818300

     $2,188.58 Add to cart
  • Loctite 222 Low-strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073102
    Loctite® 222 - Low-Strength Thread LockingLoctite® ProductsLoctite® Thread Locking ProductsX-TRA Adhesives, Sealants and Lubrication

    Loctite 222 Low-strength thread locking content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073102

     $100.96 Add to cart
  • Loctite 290 Post-assembly thread locking medium strength content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073113
    Loctite® 290 - Post-Assembly Thread Locking, Medium StrengthLoctite® ProductsLoctite® Thread Locking ProductsX-TRA Adhesives, Sealants and Lubrication

    Loctite 290 Post-assembly thread locking medium strength content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073113

     $101.14 Add to cart
  • Polyurethane timing belt T10 width 16mm 16 T10 open length PN: 16460000
    Open-Length Timing BeltsOpen-Length Timing Belts, PU, Profile TTiming Belts and Pulleys

    Polyurethane timing belt T10 width 16mm 16 T10 open length PN: 16460000

     $19.25 Add to cart
  • Polyurethane timing belt T10 width 16mm 16T10 open length PAZ = Polyamide fabric on tooth side PN: 16460001
    Open-Length Timing BeltsOpen-Length Timing Belts, PU, Profile T, PAZTiming Belts and Pulleys

    Polyurethane timing belt T10 width 16mm 16T10 open length PAZ = Polyamide fabric on tooth side PN: 16460001

     $21.63 Add to cart
  • Spur gear made of steel C45 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm PN: 21403000
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1Spur Gears, Steel, Module 1, Tooth Width 10 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm PN: 21403000

     $14.51 Add to cart
  • Spur gear made of stainless steel 1.4305 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm PN: 21499030
    Spur Gears, Stainless Steel 1.4305, Milled Teeth, Module 1 to 4Spur Gears, Stainless Steel, Module 1 Tooth Width 10 mmSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of stainless steel 1.4305 with hub module 1 30 teeth tooth width 10mm outside diameter 32mm PN: 21499030

     $32.93 Add to cart
  • Precision worm wheel centre distance 25mm i=20 20 teeth PN: 32062000
    Bevel Gears, Worm Wheels, WormsCentre Distance in Casing 25 mm + 0,05Precision Worm-Gear SetsWorm Gears - Centre Distance in Casing 25 mm + 0,05Worms, Worm Wheels, Worm Shafts

    Precision worm wheel centre distance 25mm i=20 20 teeth PN: 32062000

     $57.02 Add to cart
  • Precision worm centre distance 25mm i=25 PN: 32072500
    Bevel Gears, Worm Wheels, WormsCentre Distance in Casing 25 mm + 0,05Precision Worm-Gear SetsWorms - Centre Distance in Casing 25 mm + 0,05Worms, Worm Wheels, Worm Shafts

    Precision worm centre distance 25mm i=25 PN: 32072500

     $99.00 Add to cart
  • Precision worm centre distance 33mm i=14 PN: 32141400
    Bevel Gears, Worm Wheels, WormsCentre Distance in Casing 33 mm + 0,05Precision Worm-Gear SetsWorms - Centre Distance in Casing 33 mm + 0,05Worms, Worm Wheels, Worm Shafts

    Precision worm centre distance 33mm i=14 PN: 32141400

     $86.83 Add to cart
  • Lockwasher DIN 5406 Type MB 20 inner diameter 100mm PN: 65369001
    Fastening ElementsLocknuts, ShaftnutsLockwashers DIN 5406 for Locknuts DIN 981, Steel

    Lockwasher DIN 5406 Type MB 20 inner diameter 100mm PN: 65369001

     $5.40 Add to cart
  • Lockwasher DIN 5406 MB20 zinc plated inner diameter 100mm PN: 65369081
    Fastening ElementsLocknuts, ShaftnutsLockwashers DIN 5406 for Locknuts DIN 981, Steel zinc-plated

    Lockwasher DIN 5406 MB20 zinc plated inner diameter 100mm PN: 65369081

     $6.23 Add to cart
  • Lockwasher DIN 5406 Type MB 20 inner diameter 100mm stainless steel 1.4301 (AISI 304) PN: 65399590
    Fastening ElementsLocknuts, ShaftnutsLockwashers DIN 5406 for Locknuts DIN 981, Stainless Steel

    Lockwasher DIN 5406 Type MB 20 inner diameter 100mm stainless steel 1.4301 (AISI 304) PN: 65399590

     $26.64 Add to cart
  • Adjustable clamping lever 120 version G with external thread M6 x 20mm long lever length L2 = 62mm PN: 66575620
    Adjustable Clamping LeversAdjustable Clamping Levers 120 Version G with External ThreadParts for Operating

    Adjustable clamping lever 120 version G with external thread M6 x 20mm long lever length L2 = 62mm PN: 66575620

     $17.01 Add to cart
  • steel rubber bush PHO-P inner diameter 16mm outer diameter 32mm length of inner bush 28mm length of outer bush 25mm pressed-in version PN: 685163225P
    Heavy-Duty Steel Rubber Bushes PHO-P, Pressed-in-VersionMachine Mounts, Rubber-Buffers, Dampers

    steel rubber bush PHO-P inner diameter 16mm outer diameter 32mm length of inner bush 28mm length of outer bush 25mm pressed-in version PN: 685163225P

     $13.01 Add to cart
  • Rubber-metal MGA diameter 40mm height 25mm thread M 8x23 PN: 68559800
    Machine Mounts, Rubber-Buffers, DampersRubber-Metal Buffers MGA with Internal Thread and Threaded Stud, Zinc-plated

    Rubber-metal MGA diameter 40mm height 25mm thread M 8×23 PN: 68559800

     $6.05 Add to cart
  • Precision levelling adjuster with locknut MN 686.2 15-6.6 PN: 68620500
    Machine Mounts, Rubber-Buffers, DampersPrecision Levellers with Lock Nut MN 686.2, Zinc-plated

    Precision levelling adjuster with locknut MN 686.2 15-6.6 PN: 68620500

     $43.30 Add to cart
  • Precision levelling adjuster MN 686.3 20-11.0 PN: 68632000
    Machine Mounts, Rubber-Buffers, DampersPrecision Adjusters MN 686.3, Zinc-plated

    Precision levelling adjuster MN 686.3 20-11.0 PN: 68632000

     $33.29 Add to cart
  • Precision levelling adjuster with locknut MN 686.2 15-6.6 stainless steel 1.4301 (AISI 304) PN: 68699205
    Machine Mounts, Rubber-Buffers, DampersPrecision Levellers with Lock Nut MN 686.2, Stainless Steel

    Precision levelling adjuster with locknut MN 686.2 15-6.6 stainless steel 1.4301 (AISI 304) PN: 68699205

     $69.81 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top