Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

96

  • Sprocket KRS with hub 08 B-1 1/2x5/16" 9 teeth material steel PN: 10510900
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 1/2 x 5/16", ISO 08 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 08 B-1 1/2×5/16″ 9 teeth material steel PN: 10510900

     $6.58 Add to cart
  • Plate wheel KRL without hub 08 B-1 1/2x5/16" 13 teeth material steel PN: 10521300
    Plate wheels KRL, Pitch 1/2 x 5/16", ISO 08 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 08 B-1 1/2×5/16″ 13 teeth material steel PN: 10521300

     $5.27 Add to cart
  • Sprocket KRG with hub 08 B-1 1/2x5/16" 9 teeth material steel teeth induction hardened PN: 10588109
    Single-SprocketsSprocketsSprockets KRG, Teeth induction hardenedSprockets KRG, teeth induction hardened, Pitch 1/2 x 5/16", ISO 08 B-1Sprockets, Chains, Accessories

    Sprocket KRG with hub 08 B-1 1/2×5/16″ 9 teeth material steel teeth induction hardened PN: 10588109

     $12.22 Add to cart
  • Timing belt pulley HTD 5M material steel 20 teeth for belt width 9mm PN: 17222000
    Pulleys HTD 5M, Belt Width 9 mmPulleys Profile HTDTiming Belts and Pulleys

    Timing belt pulley HTD 5M material steel 20 teeth for belt width 9mm PN: 17222000

     $11.95 Add to cart
  • Spur gear made of steel C45 with hub module 1 35 teeth tooth width 10mm outside diameter 37mm PN: 21403500
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1Spur Gears, Steel, Module 1, Tooth Width 10 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1 35 teeth tooth width 10mm outside diameter 37mm PN: 21403500

     $17.32 Add to cart
  • Internal gear made of brass Ms58 module 0.7 60 teeth tooth width 6mm outside diameter 65mm PN: 26246000
    Internal Gears, Brass, Module 0.7Internal Gears, Module 0.5 to 3Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Internal gear made of brass Ms58 module 0.7 60 teeth tooth width 6mm outside diameter 65mm PN: 26246000

     $74.90 Add to cart
  • Rod end GEW DIN 12240-4 series E internal thread M12 right maintenance-free PN: 63411200
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GEW and GAW DIN 12240-4, E, maintenance-freeRod ends GEW DIN ISO 12240-4, E, maintenance-free, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GEW DIN 12240-4 series E internal thread M12 right maintenance-free PN: 63411200

     $28.98 Add to cart
  • Rod end GEW DIN 12240-4 series E internal thread M12 left maintenance-free PN: 63431200
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GEW and GAW DIN 12240-4, E, maintenance-freeRod ends GEW DIN ISO 12240-4, E, maintenance-free, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GEW DIN 12240-4 series E internal thread M12 left maintenance-free PN: 63431200

     $28.98 Add to cart
  • Carriage automatic adjustment DFG115-CASSAA PN: 64970703
    Accuride® - Telescopic Slides and Linear GuidesLinear Motion Guides DFG 115, Friction Guides

    Carriage automatic adjustment DFG115-CASSAA PN: 64970703

     $79.30 Add to cart
  • Stud screw DIN 6379 quality 8.8 M14 x 100mm PN: 655114100
    Fastening ElementsStuds DIN 6379 for Use with Tee Nuts

    Stud screw DIN 6379 quality 8.8 M14 x 100mm PN: 655114100

     $4.60 Add to cart
  • Cabint U handle 425 CR length 100mm material steel chrome plated PN: 66661400
    Cabinet “U” Handles 425 from Steel, Chrome PlatedCabinet U Handles, Arch HandlesParts for Operating

    Cabint U handle 425 CR length 100mm material steel chrome plated PN: 66661400

     $11.23 Add to cart
  • steel rubber bush PHO-P inner diameter 13mm outer diameter 30mm length of inner bush 40mm length of outer bush 40mm pressed-in version PN: 685133040P
    Heavy-Duty Steel Rubber Bushes PHO-P, Pressed-in-VersionMachine Mounts, Rubber-Buffers, Dampers

    steel rubber bush PHO-P inner diameter 13mm outer diameter 30mm length of inner bush 40mm length of outer bush 40mm pressed-in version PN: 685133040P

     $10.44 Add to cart
  • Swivel elbow screw-in connector 90° with o-ring tube outer diameter 10mm, thread G1/2A PN: 86171048
    Pneumatic ElementsQuick Connectors Pneufit® Push-In Fittings (mostly made of brass)Swivel Elbow Adaptors 90° with Cylindrical Thread

    Swivel elbow screw-in connector 90° with o-ring tube outer diameter 10mm, thread G1/2A PN: 86171048

     $20.05 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top