| Part number (SKU) | 16054000 |
| Material | Plastic die-cast (Polyacetal, up to 80°C) |
| Surface | Blank |
| Profile | T2.5 |
| No. of teeth | 40 |
| Belt width | 6 [mm] |
| Outer diameter of pulley | 31.33 [mm] |
| Outer diameter of flanges | 32.90 [mm] |
| Pitch circle diameter [d] | 31.83 [mm] |
| Hub diameter [ND] | 18 [mm] |
| Hub length [NL] | 6.5 [mm] |
| recess diameter [E] | 25.0 [mm] |
| Thickness of flanges [F] | 1 [mm] |
| Tooth width [b] | 7.5 [mm] |
| Total length [L] | 16 [mm] |
| Wall thickness in the recess [c] | 3.5 [mm] |
| pilot hole | 8.0 [mm] |
| Weight | 9.4 [g] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 0.009 kg |
|---|---|
| Dimensions | 32 × 32 × 16 cm |
| Material | |
| Surface | |
| Profile | |
| No. of teeth | |
| Belt width | |
| Outer diameter of pulley | |
| Outer diameter of flanges | |
| Pitch circle diameter | |
| Hub diameter | |
| Hub length | |
| recess diameter | |
| Thickness of flanges | |
| Tooth width | |
| Total length | |
| pilot hole | |
| Weight |
Timing belt pulley T2.5 material polyacetal resin 40 teeth for belt width 6mm PN: 16054000
Material: Polyacetal resin in die-cast version, colour black.
Bores machined. High hardness and low coefficient of friction which
means they can be used in various set-ups, e.g. also under water.
Note regarding pulleys made of polyacetal resin: Inside these
die-cast parts are some cavities caused by production. These parts
should therefore not be drilled too deep. With larger bores or when
grooving the cavities might become visible. This often does not affect
the functionality.
$7.47
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $7.47 |
| 10 - 24 | 4.02 % | $7.17 |
| 25+ | 7.63 % | $6.90 |
