Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

0.58

  • Double-strand sprocket ZRT 06 B-2 3/8x7/32" 30 teeth material steel for taper bush type 1210 PN: 12177130
    Double Sprockets ZRT for Taper BushesDouble-SprocketsDouble-Sprockets ZRT for Taper Bushes, Pitch 3/8 x 7/32", ISO 06 B-2SprocketsSprockets, Chains, Accessories

    Double-strand sprocket ZRT 06 B-2 3/8×7/32″ 30 teeth material steel for taper bush type 1210 PN: 12177130

     $52.94 Add to cart
  • Double sprocket ZRET for 2 single roller chains 08 B-1 19 teeth material steel for taper-bush 1210 PN: 12577419
    Double-Sprockets for two Single-Strand Roller Chains DIN 8187Double-Sprockets ZRET for two Single-Strand Roller Chains 08 B-1Double-Sprockets ZRET for two Single-Strand Roller Chains, for Taper BushSprocketsSprockets, Chains, Accessories

    Double sprocket ZRET for 2 single roller chains 08 B-1 19 teeth material steel for taper-bush 1210 PN: 12577419

     $31.75 Add to cart
  • Triple-strand sprocket DRS with hub 06 B-3 3/8x7/32" 20 teeth material steel PN: 13112000
    SprocketsSprockets, Chains, AccessoriesTriple-SprocketsTriple-Sprockets DRS with One-Sided Hub, Pitch 3/8 x 7/32", ISO 06 B-3Triple-Strand Sprockets DRS, with One-Sided Hub

    Triple-strand sprocket DRS with hub 06 B-3 3/8×7/32″ 20 teeth material steel PN: 13112000

     $19.10 Add to cart
  • V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 63mm PN: 15130600
    V-Belt Pulleys for Taper Clamping Bushes, 3 GroovesV-Belt Taper-Pulleys, 3 Grooves, Profile XPZ, SPZ and Z (10)V-Belts, Pulleys, Accessories

    V-belt pulley material cast iron for taper-bush 1108 profile XPZ, SPZ and Z (10) 3 grooves nominal diameter 63mm PN: 15130600

     $13.37 Add to cart
  • timing bar AT5 18 teeth length 140mm material 1.4305 PN: 16699918
    Pulleys Profile ATTiming Bars Profile AT5, Stainless steelTiming Belts and Pulleys

    timing bar AT5 18 teeth length 140mm material 1.4305 PN: 16699918

     $78.24 Add to cart
  • Timing belt pulley L material steel 21 teeth for belt width 050=12.7mm PN: 18212100
    Pulleys Inch-ProfilePulleys L 050Timing Belts and Pulleys

    Timing belt pulley L material steel 21 teeth for belt width 050=12.7mm PN: 18212100

     $16.85 Add to cart
  • Timing belt pulley L material steel 19 teeth for belt width 075=19.1mm PN: 18221900
    Pulleys Inch-ProfilePulleys L 075Timing Belts and Pulleys

    Timing belt pulley L material steel 19 teeth for belt width 075=19.1mm PN: 18221900

     $18.46 Add to cart
  • Spur gear shaft made from steel with one-sided hub module 1.5 16 teeth toothed length 150mm total length 200mm outside diameter 27mm PN: 21851600
    Spur Gear Shafts, Steel, Module 1 to 2Spur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear shaft made from steel with one-sided hub module 1.5 16 teeth toothed length 150mm total length 200mm outside diameter 27mm PN: 21851600

     $160.08 Add to cart
  • Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm PN: 23202500
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 2.5Spur Gears, Steel, Module 2.5, Tooth Width 20 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 2.5 25 teeth tooth width 20mm outside diameter 67.5mm PN: 23202500

     $60.59 Add to cart
  • Spur gear made of steel C45 with hub module 3 18 teeth tooth width 25mm outside diameter 60mm PN: 23301800
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 3Spur Gears, Steel, Module 3, Tooth Width 25 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 3 18 teeth tooth width 25mm outside diameter 60mm PN: 23301800

     $46.01 Add to cart
  • Locking assembly COM-B stainless steel 1.4401 bore 38mm size 38-50 PN: 61599638
    Locking Assemblies COM-B, Stainless, boreholes 10 - 50 mmLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly COM-B stainless steel 1.4401 bore 38mm size 38-50 PN: 61599638

     $250.01 Add to cart
  • Ball pillow block bearing UCPA 203 bore 17mm housing cast iron PN: 62531700
    Ball Pillow Block Bearings UCPA, Grey Cast IronBearings, Bushes, SealsPillow Block Bearings

    Ball pillow block bearing UCPA 203 bore 17mm housing cast iron PN: 62531700

     $26.59 Add to cart
  • Ball flange bearing BPFL 207 bore 35mm two-part steel sheet, zinc-plated PN: 62653500
    Ball Flange Bearing BPFL, Steel SheetBearings, Bushes, SealsFlange Bearings

    Ball flange bearing BPFL 207 bore 35mm two-part steel sheet, zinc-plated PN: 62653500

     $32.85 Add to cart
  • Ball flange bearing SSBPFL 207 bore 35mm bearing and two-part housing from stainless steel PN: 62699535
    Ball Flange Bearing SSBPFL, Stainless SteelBearings, Bushes, SealsFlange Bearings

    Ball flange bearing SSBPFL 207 bore 35mm bearing and two-part housing from stainless steel PN: 62699535

     $91.50 Add to cart
  • Slip shaft with joints PW both sides bore 12H7 telescoped length 200mm max. length 270mm steel outer diameter 25mm PN: 63182600
    Precision Slip Shafts with Joints PW, SteelSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft with joints PW both sides bore 12H7 telescoped length 200mm max. length 270mm steel outer diameter 25mm PN: 63182600

     $228.85 Add to cart
  • Slip shaft with joints PW bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 200mm max. length 270mm steel PN: 63182600N
    Precision Slip Shafts with Joints PW, SteelSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft with joints PW bore 12H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 200mm max. length 270mm steel PN: 63182600N

     $230.33 Add to cart
  • Slip shaft with joints PWN with needle bearings both sides bore 14H7 telescoped length 220mm max. length 270mm steel outer diameter 25mm PN: 63192500
    Precision Slip Shafts with Joints PWN, Steel, with Needle-Roller BearingsSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft with joints PWN with needle bearings both sides bore 14H7 telescoped length 220mm max. length 270mm steel outer diameter 25mm PN: 63192500

     $281.07 Add to cart
  • Slip shaft with joints PWN with needle bearings bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 220mm max. length 270mm steel PN: 63192500N
    Precision Slip Shafts with Joints PWN, Steel, with Needle-Roller BearingsSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft with joints PWN with needle bearings bore 14H7 with keyway DIN 6885-1 tolerance JS9 on both sides min. length 220mm max. length 270mm steel PN: 63192500N

     $292.43 Add to cart
  • Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm PN: 63199925
    Precision Slip Shafts with Joints PWNR, Stainless, with Needle-Roller BearingsSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 on both sides min. length 220mm max. length 270mm PN: 63199925

     $474.25 Add to cart
  • Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm PN: 63199925N
    Precision Slip Shafts with Joints PWNR, Stainless, with Needle-Roller BearingsSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm PN: 63199925N

     $613.54 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top