| Part number (SKU) | 65358117 |
| Material | Steel / Brass |
| Surface | Black oxide finish |
| Type | KMTA 17 |
| Thread size x Slope [d1] | M 85×2 [mm] |
| Axial bores for face spanner [N1] | 6.4 [mm] |
| Radial holes for hook wrench DIN 1810 form B with pins [N2] | 8 [mm] |
| Tightening torque [TAS] | 35 [Nm] |
| Permissible axial load | 650 [kN] |
| Weight | 1150 [g] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 1.072 kg |
|---|---|
| Dimensions | 131 × 133 × 36 cm |
| Material | |
| Surface | |
| Type | |
| Thread size x Slope | |
| Axial bores for face spanner | |
| Tightening torque | |
| Permissible axial load | |
| Weight |
locknut KMTA 17 M85x2 PN: 65358117
Material: Body of the nut steel, min. strength 350 N/mm2.
Reusable shaft nut with integrated locking devices. Special features of the shaft nut are the locking inserts from brass. These inserts are threaded and thus does not cause any damage. The locking inserts are pressed against the shaft thread with locking screws. With the screws, the runout can also be adjusted up 0.005 mm. With bores for hook wrench DIN 1810 B or face spanner. Designed for applications, which require a high precision and trustable locking.
1) Axial bores for face spanner.
2) Radial bores for hook wrench DIN 1810 form B with pins.
3) Fastening torque of locking screw.
$114.95
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $114.95 |
| 10 - 24 | 11.49 % | $101.74 |
| 25 - 49 | 23.29 % | $88.18 |
| 50+ | 30.43 % | $79.97 |
