Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

16

Showing 1–20 of 21 results

  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 40mm internal thread M8 PN: 61851640

     $3.43 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 45mm internal thread M8 PN: 61851645

     $3.80 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 50mm internal thread M8 PN: 61851650

     $4.09 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 55mm internal thread M8 PN: 61851655

     $4.90 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 60mm internal thread M8 PN: 61851660

     $6.46 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 70mm internal thread M8 PN: 61851670

     $5.53 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 80mm internal thread M8 PN: 61851680

     $6.16 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 90mm internal thread M8 PN: 61851690

     $8.27 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 100mm internal thread M8 PN: 61851695

     $7.74 Add to cart
  • Fastening ElementsParallel Pins with Internal Thread according to DIN 7979

    Parallel pin DIN 7979 hardened steel diameter 16m6 length 120mm internal thread M8 PN: 61851698

     $6.46 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars Single-Split, Type GRK with Clamping Lever, Steel, black oxide finish

    Clamp collar single-split steel C45 black oxide finished bore 16mm with adjustable clamp lever M5 x 14 length 30mm type GRK PN: 62311600GRK

     $18.87 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Steel, black oxide finish

    Clamp collar single-split steel C45 black oxide finished bore 16mm with adjustable clamp lever M5 x 14 length 30mm PN: 62311600K

     $13.40 Add to cart
  • Bearings, Bushes, SealsBushesBushes Sintered Bronze, Similar to DIN 1850-3 (DIN 4379 Version C)

    Bush similar to DIN 1850-3 J sintered bronze borehole 16mm outer diameter 22mm length 25mm PN: 62334303

     $7.90 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Aluminium

    Clamp collar single-split aluminium bore 16mm with adjustable clamp lever M5 x 14 length 30mm PN: 62366116K

     $15.00 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Steel zinc-plated

    Clamp collar single-split steel C45 zinc-plated bore 16mm with adjustable clamp lever M5 x 14 length 30mm PN: 62388116K

     $14.22 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars Single-Split, Type GRK with Clamping Lever, Stainless steel

    Clamp collar single-split stainless steel 1.4305 bore 16mm with adjustable clamp lever M5 x 14 length 30mm type GRK PN: 62399116GRK

     $30.89 Add to cart
  • Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars Single-Split, Type K with Clamping Lever, Stainless Steel

    Clamp collar single-split stainless steel 1.4305 bore 16mm with adjustable clamp lever M5 x 14 length 30mm PN: 62399116K

     $19.47 Add to cart
  • Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 16 x 32 right handed fine thread M16x1,5 steel zinc-plated PN: 63701500F

     $16.95 Add to cart
  • Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 16 x 64 right handed fine thread M16x1,5 steel zinc-plated PN: 63701600F

     $19.97 Add to cart
  • Clevises DIN 71752 and BoltsClevises DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis DIN 71752 size 16 x 32 right handed fine thread M16x1.5 steel zinc-plated PN: 63721500F

     $11.37 Add to cart

Maedler North America is your perfect partner for everything that revolves around drive-train technology. With an inventory of over  30,000 parts, we’re confident that you’ll find what you are looking for.

We Are Here To Assist You

contact us today

Menu

Copyright © MaedlerNorthAmerica 2021 | Powered by MaedlerNorthAmerica.com

Scroll to Top