Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

60

  • Shim ring DIN 988 48 x 60 x 0,3 material steel DC01 C590 PN: 624348604
    Fastening ElementsShim rings DIN 988

    Shim ring DIN 988 48 x 60 x 0,3 material steel DC01 C590 PN: 624348604

     $0.35 Add to cart
  • Shim ring DIN 988 48 x 60 x 0,5 material steel DC01 C590 PN: 624348605
    Fastening ElementsShim rings DIN 988

    Shim ring DIN 988 48 x 60 x 0,5 material steel DC01 C590 PN: 624348605

     $0.36 Add to cart
  • Shim ring DIN 988 48 x 60 x 1 material steel DC01 C590 PN: 624348606
    Fastening ElementsShim rings DIN 988

    Shim ring DIN 988 48 x 60 x 1 material steel DC01 C590 PN: 624348606

     $0.39 Add to cart
  • Shim ring DIN 988 48 x 60 x 1,2 material steel DC01 C590 PN: 624348607
    Fastening ElementsShim rings DIN 988

    Shim ring DIN 988 48 x 60 x 1,2 material steel DC01 C590 PN: 624348607

     $0.42 Add to cart
  • Shim ring DIN 988 48 x 60 x 1,5 material steel DC01 C590 PN: 624348608
    Fastening ElementsShim rings DIN 988

    Shim ring DIN 988 48 x 60 x 1,5 material steel DC01 C590 PN: 624348608

     $0.47 Add to cart
  • Shim ring DIN 988 48 x 60 x 2 material steel DC01 C590 PN: 624348609
    Fastening ElementsShim rings DIN 988

    Shim ring DIN 988 48 x 60 x 2 material steel DC01 C590 PN: 624348609

     $0.51 Add to cart
  • Clamp collar double-split double wide steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 PN: 62444000
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Wide, Double-Split, Steel

    Clamp collar double-split double wide steel C45 black oxide finished bore 40mm with bolts DIN 912 12.9 PN: 62444000

     $45.53 Add to cart
  • Clamp collar single-split double wide stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 PN: 62499140
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double Wide, Single-Split, Stainless Steel

    Clamp collar single-split double wide stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 PN: 62499140

     $90.66 Add to cart
  • Clamp collar double-split double wide stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 PN: 62499440
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Wide, Double-Split, Stainless Steel

    Clamp collar double-split double wide stainless steel 1.4305 bore 40mm with bolts DIN 912 A2-70 PN: 62499440

     $94.04 Add to cart
  • Ball joint RW bore 35H7 material steel outer diameter 60mm total length 165mm PN: 63136000
    Ball Joints RW, SteelSingle Universal Joints in different modelsUniversal Joints

    Ball joint RW bore 35H7 material steel outer diameter 60mm total length 165mm PN: 63136000

     $171.53 Add to cart
  • Ball joint RW bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel PN: 63136000N
    Ball Joints RW, SteelSingle Universal Joints in different modelsUniversal Joints

    Ball joint RW bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel PN: 63136000N

     $279.77 Add to cart
  • Slip shaft LW with ball joints bore 35H7 outer diameter 60mm steel PN: 63156000
    Slip Shaft LW with Ball Joints, SteelSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft LW with ball joints bore 35H7 outer diameter 60mm steel PN: 63156000

     $859.45 Add to cart
  • Slip shaft LW with ball joints bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel PN: 63156000N
    Slip Shaft LW with Ball Joints, SteelSlip Shafts (Telescopic Universal Joints) in different modelsUniversal Joints

    Slip shaft LW with ball joints bore 35H7 with keyway DIN 6885-1 on both sides outer diameter 60mm steel PN: 63156000N

     $981.15 Add to cart
  • Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == PN: 63202500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == PN: 63202500

     $105.34 Add to cart
  • Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == PN: 63212500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == PN: 63212500

     $105.34 Add to cart
  • Rod end GS DIN ISO 12240-4 series K external thread M24x2 right == Initial lubrication required before use == PN: 63222500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M24x2 right == Initial lubrication required before use == PN: 63222500

     $98.84 Add to cart
  • Rod end GS DIN ISO 12240-4 series K external thread M24x2 left == Initial lubrication required before use == PN: 63232500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K external thread M24x2 left == Initial lubrication required before use == PN: 63232500

     $98.84 Add to cart
  • Rod end GT DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free PN: 63262500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free PN: 63262500

     $106.76 Add to cart
  • Rod end GT DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free PN: 63272500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free PN: 63272500

     $106.76 Add to cart
  • Rod end GT DIN ISO 12240-4 series K external thread M24x2 right maintenance-free PN: 63282500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, external threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K external thread M24x2 right maintenance-free PN: 63282500

     $97.57 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top