| Part number (SKU) | 35950700 |
| Material | Zinc die-cast |
| Surface | Blank |
| Ratio [i] | 1:1 (16/16) |
| Module | 3.5 |
| No. of teeth | 16 |
| Outer diameter [da] | 61.4 [mm] |
| Bore [BH9] | 16 [mm] |
| Max. torque [MD] | 580 [Ncm] |
| Weight | 228 [g] |
| optional counter wheel (Part-No.) | 35950700 |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 0.227 kg |
|---|---|
| Dimensions | 61 × 61 × 33 cm |
| Material | |
| Surface | |
| Ratio | |
| Module | |
| No. of teeth | |
| Outer diameter | |
| Bore | |
| Max. torque | |
| Weight |
Bevel gear made of die-cast zinc ZnAl4Cu1 module 3.5 16 teeth i=1:1 bore 16mm PN: 35950700
Material: Zinc die-cast ZnAI4Cu1.
Shaft angle = 90°. Bores machined. The bevel gears only run as a pair at
the stated ratio. In the torque calculation of zinc-die-cast bevel gears
only the root strength was considered. Due to the material properties
these gears are only to a limited extend suitable for continuous
operation. Note for ordering: These gears are sold singulary, not
by pair. For a pair of bevel gears, you have to order two matching gears
of the same module and ratio. At ratio 1:1, you need two pieces of the
same number of teeth. At ratio uneven 1:1, you need two pieces with a
different number of teeth of the same ratio.
$16.90
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $16.90 |
| 10 - 24 | 3.43 % | $16.32 |
| 25+ | 7.28 % | $15.67 |
