Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

2.5

Showing all 10 results

  • Clamp collar with thread single split steel C45 black oxide finished thread M20 x 2.50 with bolt DIN 912 12.9 PN: 62362000
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars, with Thread, Steel

    Clamp collar with thread single split steel C45 black oxide finished thread M20 x 2.50 with bolt DIN 912 12.9 PN: 62362000

     $14.49 Add to cart
  • Clamp collar with thread double split steel C45 black oxide finished thread M20 x 2,5 with bolts DIN 912 12.9 PN: 62392000
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars with Thread, Double-Split, Material Steel

    Clamp collar with thread double split steel C45 black oxide finished thread M20 x 2,5 with bolts DIN 912 12.9 PN: 62392000

     $21.22 Add to cart
  • Clamp collar with thread single split stainless steel 1.4305 thread M 20 x 2.50 with bolt DIN 912 A2-70 PN: 62399620
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars, with Thread, Stainless Steel

    Clamp collar with thread single split stainless steel 1.4305 thread M 20 x 2.50 with bolt DIN 912 A2-70 PN: 62399620

     $41.16 Add to cart
  • Clamp collar with thread double split stainless steel 1.4305 thread M20 x 2,5 with bolts DIN 912 A2-70 PN: 62399920
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars with Thread, Double-Split, Stainless Steel

    Clamp collar with thread double split stainless steel 1.4305 thread M20 x 2,5 with bolts DIN 912 A2-70 PN: 62399920

     $44.67 Add to cart
  • Clevis joint DIN 71752 with split pin size 20 x 40 right handed steel zinc-plated PN: 63702000
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 20 x 40 right handed steel zinc-plated PN: 63702000

     $26.57 Add to cart
  • Clevis joint DIN 71752 with split pin size 20 x 40 left handed steel zinc-plated PN: 63712000
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 20 x 40 left handed steel zinc-plated PN: 63712000

     $27.38 Add to cart
  • Clevis DIN 71752 size 20 x 40 right handed steel zinc-plated PN: 63722000
    Clevises DIN 71752 and BoltsClevises DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis DIN 71752 size 20 x 40 right handed steel zinc-plated PN: 63722000

     $20.80 Add to cart
  • Clevis DIN 71752 size 20 x 40 left handed steel zinc-plated PN: 63732000
    Clevises DIN 71752 and BoltsClevises DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis DIN 71752 size 20 x 40 left handed steel zinc-plated PN: 63732000

     $21.38 Add to cart
  • Clevis joint DIN 71752 with circlip size 20 x 40 right handed stainless steel 1.4301 PN: 63799020
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints similar to DIN 71752, Stainless SteelRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with circlip size 20 x 40 right handed stainless steel 1.4301 PN: 63799020

     $76.78 Add to cart
  • Clevis DIN 71752 size 20 x 40 right handed stainless steel 1.4301 PN: 63799220
    Clevises DIN 71752 and BoltsClevises similar to DIN 71752, Stainless SteelRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis DIN 71752 size 20 x 40 right handed stainless steel 1.4301 PN: 63799220

     $63.94 Add to cart

Maedler North America is your perfect partner for everything that revolves around drive-train technology. With an inventory of over  35,000 parts, we’re confident that you’ll find what you are looking for.

We Are Here To Assist You

contact us today

Menu

Copyright © MaedlerNorthAmerica | Powered by MaedlerNorthAmerica.com

Please enter your email address to receive your cart as a PDF.
Scroll to Top