Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1.22

  • Sprocket KRS with hub 10 B-1 5/8x3/8" 20 teeth material steel PN: 10612000
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 5/8 x 3/8", ISO 10 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 10 B-1 5/8×3/8″ 20 teeth material steel PN: 10612000

     $19.75 Add to cart
  • Triple-strand plate wheel DRL without hub 08 B-3 1/2x5/16" 21 teeth material steel PN: 13522100
    SprocketsSprockets, Chains, AccessoriesTriple-Plate Wheels DRL without Hub, Pitch 1/2 x 5/16", ISO 08 B-3Triple-Plate Wheels DRL, without HubTriple-Sprockets

    Triple-strand plate wheel DRL without hub 08 B-3 1/2×5/16″ 21 teeth material steel PN: 13522100

     $28.09 Add to cart
  • timing bar HTD 8M 23 teeth length 200mm material aluminium PN: 17492301
    Pulleys Profile HTDTiming Bars Profile HTD 8M, AluminiumTiming Belts and Pulleys

    timing bar HTD 8M 23 teeth length 200mm material aluminium PN: 17492301

     $83.77 Add to cart
  • Spur gear made of steel C45 with hub module 2.5 31 teeth tooth width 25mm outside diameter 82.5mm PN: 23211031
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 2.5Spur Gears, Steel, Module 2.5, Tooth Width 25 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 2.5 31 teeth tooth width 25mm outside diameter 82.5mm PN: 23211031

     $67.93 Add to cart
  • Parallel pin DIN 6325 hardened steel diameter 3m6 length 22mm PN: 61840322
    Fastening ElementsParallel Pins According to DIN 6325

    Parallel pin DIN 6325 hardened steel diameter 3m6 length 22mm PN: 61840322

     $0.18 Add to cart
  • Round flange trapezoidal nut Tr.32 x 6 single-start right material red brass PN: 64413200
    DIN103 - Trapezoidal Spindles and Nuts, single thread, right handFlanged Trapezoidal Nut, single thread, right hand, red brassTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Round flange trapezoidal nut Tr.32 x 6 single-start right material red brass PN: 64413200

     $128.13 Add to cart
  • Round flange trapezoidal nut Tr.32 x 6 single-start left material red brass PN: 64443200
    DIN103 - Trapezoidal Spindles and Nuts, single thread, left handFlanged Trapezoidal Nut, single thread, left hand, red brassTrapezoidal Thread Spindles, Nuts and Ball Screw Drives

    Round flange trapezoidal nut Tr.32 x 6 single-start left material red brass PN: 64443200

     $141.34 Add to cart
  • Splined hub with flange DIN ISO 14 KN 42x48 length 80mm steel C45Pb PN: 64851000
    Splined Hubs with Flange - DIN ISO 14 made of Steel C45Splined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 42×48 length 80mm steel C45Pb PN: 64851000

     $168.03 Add to cart
  • Splined hub with flange DIN ISO 14 KN 42x48 length 80mm stainless steel 1.4305 PN: 64899510
    Splined Hubs with Flange - DIN ISO 14 made of Stainless SteelSplined Shafts and Toothed Shafts and Hubs

    Splined hub with flange DIN ISO 14 KN 42×48 length 80mm stainless steel 1.4305 PN: 64899510

     $333.84 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top