Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

1,6

  • Shoulder screw similar to ISO 7379 ø8f9-M6-25mm stainless steel 1.4301 PN: 619808025
    Fastening ElementsSocket Shoulder Screws similar ISO 7379, Stainless steel

    Shoulder screw similar to ISO 7379 ø8f9-M6-25mm stainless steel 1.4301 PN: 619808025

     $5.71 Add to cart
  • Clamp collar double-split plastic PA reinforced black-grey bore 14mm PN: 62355014
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Split, Polyamide

    Clamp collar double-split plastic PA reinforced black-grey bore 14mm PN: 62355014

     $9.79 Add to cart
  • Clamp collar double-split aluminium bore 13mm with bolts DIN 912 A2-70 PN: 62366413
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Split, Aluminium

    Clamp collar double-split aluminium bore 13mm with bolts DIN 912 A2-70 PN: 62366413

     $13.55 Add to cart
  • Clamp collar double-split aluminium anodized bore 13mm with screws DIN 912 A2-70 PN: 62367413
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars - Clamp Collars Double-Split, Aluminium anodized

    Clamp collar double-split aluminium anodized bore 13mm with screws DIN 912 A2-70 PN: 62367413

     $21.17 Add to cart
  • Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 8mm outer diameter 19mm == Initial lubrication required before use == PN: 63320800
    Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle JointsSpherical bearings DIN 12240-1, K (wide version)Spherical bearings DIN ISO 12240-1, K, re-lubricateable

    Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 8mm outer diameter 19mm == Initial lubrication required before use == PN: 63320800

     $13.18 Add to cart
  • Radial spherical bearing DIN ISO 12240-1-E type GE...DO bore 12mm outer diameter 22mm == Initial lubrication required before use == PN: 63361200
    Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle JointsSpherical bearings DIN 12240-1, E (slim version)Spherical bearings DIN ISO 12240-1, E, re-lubricateable

    Radial spherical bearing DIN ISO 12240-1-E type GE…DO bore 12mm outer diameter 22mm == Initial lubrication required before use == PN: 63361200

     $11.12 Add to cart
  • Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 8mm outer diameter 19mm stainless steel == Initial lubrication required before use == PN: 63399208
    Rod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle JointsSpherical bearings DIN 12240-1, K (wide version)Spherical bearings DIN ISO 12240-1, K, Stainless, re-lubricateable

    Spherical bearing DIN ISO 12240-1-K type G without outer ring relubricateable bore 8mm outer diameter 19mm stainless steel == Initial lubrication required before use == PN: 63399208

     $33.80 Add to cart
  • Rod end GAW DIN 12240-4 series E external thread M6 right maintenance-free PN: 63460600
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GAW DIN ISO 12240-4, E, maintenance-free, external threadRod ends GEW and GAW DIN 12240-4, E, maintenance-freeRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GAW DIN 12240-4 series E external thread M6 right maintenance-free PN: 63460600

     $22.51 Add to cart
  • Rod end GAW DIN 12240-4 series E external thread M6 left maintenance-free PN: 63480600
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GAW DIN ISO 12240-4, E, maintenance-free, external threadRod ends GEW and GAW DIN 12240-4, E, maintenance-freeRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GAW DIN 12240-4 series E external thread M6 left maintenance-free PN: 63480600

     $22.51 Add to cart
  • Clevis joint DIN 71752 with split pin size 6 x 12 right handed steel zinc-plated PN: 63700500
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 6 x 12 right handed steel zinc-plated PN: 63700500

     $3.54 Add to cart
  • Clevis joint DIN 71752 with split pin size 6 x 12 left handed steel zinc-plated PN: 63710500
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints DIN 71752, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 6 x 12 left handed steel zinc-plated PN: 63710500

     $3.72 Add to cart
  • Clevis GD with rotating shaft similar DIN 71752 size 6x12 right handed steel zinc-plated PN: 63755205
    Clevises DIN 71752 and BoltsClevises DIN 71752, Zinc-Plated, with Rotating ShaftRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis GD with rotating shaft similar DIN 71752 size 6×12 right handed steel zinc-plated PN: 63755205

     $4.17 Add to cart
  • Clevis GD with rotating shaft similar DIN 71752 size 6x12 left handed steel zinc-plated PN: 63755305
    Clevises DIN 71752 and BoltsClevises DIN 71752, Zinc-Plated, with Rotating ShaftRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis GD with rotating shaft similar DIN 71752 size 6×12 left handed steel zinc-plated PN: 63755305

     $4.17 Add to cart
  • Clevis joint DIN 71752 with split pin size 6 x 12 e x ternal thread M6 right handed steel zinc-plated PN: 63770500
    Clevis Joints DIN 71752 (ex DIN 71751)Clevises DIN 71752 with External Thread, Zinc-PlatedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with split pin size 6 x 12 e x ternal thread M6 right handed steel zinc-plated PN: 63770500

     $6.35 Add to cart
  • Clevis joint DIN 71752 with circlip size 6 x 12 right handed stainless steel 1.4301 PN: 63799005
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints similar to DIN 71752, Stainless SteelRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with circlip size 6 x 12 right handed stainless steel 1.4301 PN: 63799005

     $12.87 Add to cart
  • Clevis joint DIN 71752 with circlip size 6 x 12 left handed stainless steel 1.4301 PN: 63799105
    Clevis Joints DIN 71752 (ex DIN 71751)Clevis Joints similar to DIN 71752, Stainless SteelRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Clevis joint DIN 71752 with circlip size 6 x 12 left handed stainless steel 1.4301 PN: 63799105

     $12.87 Add to cart
  • hose clamp DIN 3017 A type W1 steel zinc plated diameter range 25-40mm band width 9mm PN: 63811040
    Fastening ElementsHose clamps DIN 3017 Shape A, W1, Steel, zinc-plated

    hose clamp DIN 3017 A type W1 steel zinc plated diameter range 25-40mm band width 9mm PN: 63811040

     $1.32 Add to cart
  • hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 25-40mm band width 9mm PN: 63814040
    Fastening ElementsHose Clamps DIN 3017 Shape A, W4, Stainless Steel

    hose clamp DIN 3017 A type W4 stainless steel 1.4301 diameter range 25-40mm band width 9mm PN: 63814040

     $2.64 Add to cart
  • Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 12mm PN: 64611202
    Linear Ball Bearings ISO Series 3, Closed Design and Open DesignLinear Bearings KB-3 ISO Series 3, Closed Design, Easy-LineLinear Motion, Linear Bearings, Precision Rail Guides

    Linear bearing KB-3 ISO series 3 Easy-Line with seals for shaft Ø 12mm PN: 64611202

     $42.95 Add to cart
  • Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 16mm PN: 64611607
    Linear Ball Bearings ISO Series 3, Closed Design and Open DesignLinear Bearings KB-3-A-O ISO Series 3, Open Design, Self-AligningLinear Motion, Linear Bearings, Precision Rail Guides

    Self-aligning open linear bearing KB-3-A ISO series 3 premium with seals for shaft Ø 16mm PN: 64611607

     $101.78 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top