Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

4.60

  • Sprocket KRT 12 B-1 3/4x7/16" 45 teeth material cast iron for taper bush type 2517 PN: 10777145G
    Single-SprocketsSprocketsSprockets KRT for Taper BushesSprockets KRT for Taper Bushes, Pitch 3/4 x 7/16", ISO 12 B-1Sprockets, Chains, Accessories

    Sprocket KRT 12 B-1 3/4×7/16″ 45 teeth material cast iron for taper bush type 2517 PN: 10777145G

     $165.62 Add to cart
  • Sprocket KRS with hub 20 B-1 1 1/4x3/4" 15 teeth material steel PN: 10911500
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 1 1/4 x 3/4", ISO 20 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 20 B-1 1 1/4×3/4″ 15 teeth material steel PN: 10911500

     $99.32 Add to cart
  • Plate wheel KRL without hub 20 B-1 1 1/4x3/4" 21 teeth material steel PN: 10922100
    Plate wheels KRL, Pitch 1 1/4 x 3/4", ISO 20 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 20 B-1 1 1/4×3/4″ 21 teeth material steel PN: 10922100

     $117.15 Add to cart
  • V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 315mm PN: 15313100
    V-Belt Pulleys for Taper Clamping Bushes, 1 GrooveV-Belt Taper-Pulleys, 1 Groove, Profile XPA, SPA and A (13)V-Belts, Pulleys, Accessories

    V-belt pulley material cast iron for taper-bush 2012 profile XPA, SPA and A (13) 1 groove nominal diameter 315mm PN: 15313100

     $83.17 Add to cart
  • V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 224mm PN: 15512200
    V-Belt Pulleys for Taper Clamping Bushes, 1 GrooveV-Belt Taper-Pulleys, 1 Groove, Profile XPB, SPB and B (17)V-Belts, Pulleys, Accessories

    V-belt pulley material cast iron for taper-bush 2012 profile XPB, SPB and B (17) 1 groove nominal diameter 224mm PN: 15512200

     $78.98 Add to cart
  • timing bar HTD 8M 26 teeth length 200mm material steel PN: 17492600
    Pulleys Profile HTDTiming Bars Profile HTD 8M, SteelTiming Belts and Pulleys

    timing bar HTD 8M 26 teeth length 200mm material steel PN: 17492600

     $91.01 Add to cart
  • Spur gear made of steel C45 without hub module 5 25 teeth tooth width 50mm outside diameter 135mm PN: 24511025
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 5Spur Gears, Steel, Module 5, Tooth Width 50 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 5 25 teeth tooth width 50mm outside diameter 135mm PN: 24511025

     $152.80 Add to cart
  • Crane wheel made of C 45 with axle shaft diameter 130mm PN: 77601300
    Castors, Wheels, Flanged Crane Wheels, Travel Wheel SystemsIdlers Made of Steel (C45) with Two-Sided Flange

    Crane wheel made of C 45 with axle shaft diameter 130mm PN: 77601300

     $304.73 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top