Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

63

  • Locknut DIN 70852 M40x1,5 stainless steel 1.4301 (AISI 304) PN: 65399515
    Fastening ElementsLocknuts DIN 70852, Stainless SteelLocknuts, Shaftnuts

    Locknut DIN 70852 M40x1,5 stainless steel 1.4301 (AISI 304) PN: 65399515

     $15.34 Add to cart
  • Stud screw DIN 6379 quality 10.9 M8 x 100mm PN: 655108100
    Fastening ElementsStuds DIN 6379 for Use with Tee Nuts

    Stud screw DIN 6379 quality 10.9 M8 x 100mm PN: 655108100

     $2.35 Add to cart
  • Conical seat DIN 6319 form D outer diameter 44mm stainless steel 1.4301 PN: 65599524
    Conical Seats DIN 6319 Type D, Stainless Steel 1.4301Fastening ElementsSpherical Washers / Conical Seats DIN 6319

    Conical seat DIN 6319 form D outer diameter 44mm stainless steel 1.4301 PN: 65599524

     $7.83 Add to cart
  • Eccentric clamp 927 Version A external thread M6 x 25 PN: 66576312
    Eccentric clamps 927Eccentric clamps 927 with External Thread, Version A (adjustable)Parts for Operating

    Eccentric clamp 927 Version A external thread M6 x 25 PN: 66576312

     $21.57 Add to cart
  • Eccentric clamp 927 Version B external thread M6 x 25 PN: 66576322
    Eccentric clamps 927Eccentric clamps 927 with External Thread, Version BParts for Operating

    Eccentric clamp 927 Version B external thread M6 x 25 PN: 66576322

     $15.64 Add to cart
  • Gear lever handle 209 with ball knob M8 l1 100mm steel zinc plated PN: 66606800
    Gear Lever Handles 209Gear Lever Handles 209 with Ball Knob DIN 319, Steel zinc platedParts for Operating

    Gear lever handle 209 with ball knob M8 l1 100mm steel zinc plated PN: 66606800

     $6.56 Add to cart
  • Gear lever handle 209 with ball knob M8 l1 100mm stainless steel PN: 66699008
    Gear Lever Handles 209Gear Lever Handles 209 with Ball Knob DIN 319, StainlessParts for Operating

    Gear lever handle 209 with ball knob M8 l1 100mm stainless steel PN: 66699008

     $10.73 Add to cart
  • Cranked handle 569 made from plastic square hole SW 10mm length 64mm PN: 66720600
    Cranked HandlesCranked Handles 569, PlasticParts for Operating

    Cranked handle 569 made from plastic square hole SW 10mm length 64mm PN: 66720600

     $34.83 Add to cart
  • Rubber pad for machine feet oval L=216mm PN: 68597599
    Machine Mounts, Rubber-Buffers, DampersRubber Pads for Machine Mounts with Oval Flange

    Rubber pad for machine feet oval L=216mm PN: 68597599

     $10.22 Add to cart
  • Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 10mm, thread G1/4A PN: 86361028
    Elbow Banjo Assembly, Regulating Out, with Sealing RingPneumatic ElementsQuick Connectors Pneufit® Push-In Fittings (mostly made of brass)

    Swivel elbow adaptor with none-return valve to be used on the exhaust side, with sealing ring tube outer diameter 10mm, thread G1/4A PN: 86361028

     $33.04 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top