Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

750

  • Sprocket KRS with hub 083 1/2x3/16" 27 teeth material steel PN: 10312700
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 1/2 × 3/16", ISO 083Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub 083 1/2×3/16″ 27 teeth material steel PN: 10312700

     $18.38 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-2 PN: 14040326
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short low tensioning force 10 B-2 PN: 14040326

     $309.57 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-2 PN: 14040327
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short low tensioning force 12 B-2 PN: 14040327

     $320.90 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-3 PN: 14040335
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short low tensioning force 08 B-3 PN: 14040335

     $331.43 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 PN: 14040426
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 PN: 14040426

     $310.74 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 PN: 14040427
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 PN: 14040427

     $320.90 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 PN: 14040435
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1Roller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 PN: 14040435

     $324.56 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 stainless steel PN: 14040526
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1, StainlessRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short high tensioning force 10 B-2 stainless steel PN: 14040526

     $440.88 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 stainless steel PN: 14040527
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1, StainlessRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short high tensioning force 12 B-2 stainless steel PN: 14040527

     $439.31 Add to cart
  • Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 stainless steel PN: 14040535
    Chain Tensioners and AccessoriesChain Tensioners SPANN-BOX® Size 1, StainlessRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain tensioner SPANN-BOX® size 1 short high tensioning force 08 B-3 stainless steel PN: 14040535

     $451.02 Add to cart
  • Timing belt pulley HTD 5M material steel 40 teeth for belt width 25mm PN: 17244000
    Pulleys HTD 5M, Belt Width 25 mmPulleys Profile HTDTiming Belts and Pulleys

    Timing belt pulley HTD 5M material steel 40 teeth for belt width 25mm PN: 17244000

     $34.60 Add to cart
  • Spur gear made of steel C45 without hub module 2 40 teeth tooth width 20mm outside diameter 84mm PN: 24111040
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 2Spur Gears, Steel, Module 2, Tooth Width 20 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 2 40 teeth tooth width 20mm outside diameter 84mm PN: 24111040

     $44.67 Add to cart
  • Bevel gear made of steel module 3 30 teeth i=2:1 milled PN: 36145700
    Bevel GearsBevel Gears, Steel, Straight Tooth System, ratio 1:1 - 4:1Bevel Gears, Steel, Straight Tooth System, ratio 2:1Bevel Gears, Worm Wheels, Worms

    Bevel gear made of steel module 3 30 teeth i=2:1 milled PN: 36145700

     $100.10 Add to cart
  • Key steel DIN 6880 12 x 8 x 1000 mm material stainless steel 1.4571 PN: 61991208
    Fastening ElementsKey Steel DIN 6880 Stainless Steel

    Key steel DIN 6880 12 x 8 x 1000 mm material stainless steel 1.4571 PN: 61991208

     $148.70 Add to cart
  • Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == PN: 63202500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M24x2 right == Initial lubrication required before use == PN: 63202500

     $105.34 Add to cart
  • Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == PN: 63212500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GS DIN ISO 12240-4, K, re-lubricateableRod ends GS DIN ISO 12240-4, K, re-lubricateable, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GS DIN ISO 12240-4 series K internal thread M24x2 left == Initial lubrication required before use == PN: 63212500

     $105.34 Add to cart
  • Rod end GT DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free PN: 63262500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free PN: 63262500

     $106.76 Add to cart
  • Rod end GT DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free PN: 63272500
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT DIN 12240-4, K, maintenance-freeRod ends GT DIN ISO 12240-4, K, maintenance-free, internal threadRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free PN: 63272500

     $106.76 Add to cart
  • Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free stainless steel PN: 63299625
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT-R DIN ISO 12240-4, K, stainless steel, maintenance-freeRod ends GT-R DIN ISO 12240-4,K,Stainless Steel maintenance-free,internal thraedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 right maintenance-free stainless steel PN: 63299625

     $207.93 Add to cart
  • Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free stainless steel PN: 63299725
    Rod Ends DIN ISO 12240 (ex DIN 648)Rod ends GT-R DIN ISO 12240-4, K, stainless steel, maintenance-freeRod ends GT-R DIN ISO 12240-4,K,Stainless Steel maintenance-free,internal thraedRod Ends, Spherical Bearings, Clevises, Clevis Joints, Angle Joints

    Rod end GT-R DIN ISO 12240-4 series K internal thread M24x2 left maintenance-free stainless steel PN: 63299725

     $207.93 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top