Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

83

  • Sprocket KRS with hub pitch 8mm 17 teeth material steel PN: 10081700
    Single-SprocketsSprocketsSprockets KRS with One-Sided Hub, Pitch 8mm, ISO 05 B-1Sprockets KRS with One-Sided Hub, pre-boredSprockets, Chains, Accessories

    Sprocket KRS with hub pitch 8mm 17 teeth material steel PN: 10081700

     $6.69 Add to cart
  • Inner chain link type 4/B for roller chain DIN ISO 606 16 B - GL pitch 1"x17,02mm with straight plates PN: 10800100GL
    Connecting Links for Single-Strand Roller Chains, Standard / SteelInner Link No. 4/B, with Straight PlatesRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Inner chain link type 4/B for roller chain DIN ISO 606 16 B – GL pitch 1″x17,02mm with straight plates PN: 10800100GL

     $3.64 Add to cart
  • Loctite 603 Retaining compound oil-Tolerant content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073203
    Loctite® 603 - Retaining Compound, High Strength, Oil-TolerantLoctite® Bonding Products - Retaining CompoundsLoctite® ProductsX-TRA Adhesives, Sealants and Lubrication

    Loctite 603 Retaining compound oil-Tolerant content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073203

     $115.32 Add to cart
  • Loctite 638 Retaining compound for large gaps content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073208
    Loctite® 638 - Retaining Compound, High Strength, for Large GapsLoctite® Bonding Products - Retaining CompoundsLoctite® ProductsX-TRA Adhesives, Sealants and Lubrication

    Loctite 638 Retaining compound for large gaps content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073208

     $109.84 Add to cart
  • Loctite 648 Retaining compound with high temperature resistance content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073214
    Loctite® 648 - Retaining Compound, High Strength, with High Temperature ResistanceLoctite® Bonding Products - Retaining CompoundsLoctite® ProductsX-TRA Adhesives, Sealants and Lubrication

    Loctite 648 Retaining compound with high temperature resistance content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073214

     $109.35 Add to cart
  • Timing belt pulley T10 material aluminium 10 teeth for belt width 40mm 55 T10/10-2 PN: 16411000
    Pulleys Profile TPulleys T10, Belt Width 40 mmTiming Belts and Pulleys

    Timing belt pulley T10 material aluminium 10 teeth for belt width 40mm 55 T10/10-2 PN: 16411000

     $16.22 Add to cart
  • Spur gear made of steel 11SMn30+C with hub module 0.7 70 teeth tooth width 5mm outside diameter 50.4mm PN: 21207000
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel 11SMn30+C with hub module 0.7 70 teeth tooth width 5mm outside diameter 50.4mm PN: 21207000

     $23.58 Add to cart
  • Spur gear made of steel C45 without hub module 1.5 21 teeth tooth width 15mm outside diameter 34.5mm PN: 22802100
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1.5Spur Gears, Steel, Module 1.5, Tooth Width 15 mm, Without HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 without hub module 1.5 21 teeth tooth width 15mm outside diameter 34.5mm PN: 22802100

     $20.53 Add to cart
  • single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm PN: 51204-MAE
    Ball Bearings / Roller BearingsBearings, Bushes, SealsThrust Ball Bearings, Single Direction, Single Row, MAEDLER®

    single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm PN: 51204-MAE

     $5.08 Add to cart
  • SKF single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm PN: 51204-SKF
    Ball Bearings / Roller BearingsBearings, Bushes, SealsThrust Ball Bearings, Single Direction, Single Row, SKF®

    SKF single direction thrust ball bearing 51204 inner Ø 20mm outer Ø 40mm height 14mm PN: 51204-SKF

     $32.07 Add to cart
  • Friction clutch R2 with 6 friction lamellas type C bore 6mm PN: 61044800
    Couplings, Friction Clutches, Safety CouplingsFriction Clutches, Safety CouplingsSlip Clutches Type C, axial arrangement with self-aligning

    Friction clutch R2 with 6 friction lamellas type C bore 6mm PN: 61044800

     $137.38 Add to cart
  • Friction clutch R2 with 6 friction lamellas type C bore 8mm PN: 61044900
    Couplings, Friction Clutches, Safety CouplingsFriction Clutches, Safety CouplingsSlip Clutches Type C, axial arrangement with self-aligning

    Friction clutch R2 with 6 friction lamellas type C bore 8mm PN: 61044900

     $137.40 Add to cart
  • Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type GA PN: 62311600GA
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type GA, Steel, black oxide finish

    Clamp collar single-split steel C45 black oxide finished bore 16mm with bolt DIN 912 12.9 type GA PN: 62311600GA

     $16.36 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type B1 PN: 62341600B1
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, black oxided

    Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type B1 PN: 62341600B1

     $18.18 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type B2 PN: 62341600B2
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Steel, black oxided

    Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type B2 PN: 62341600B2

     $19.12 Add to cart
  • Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type GR PN: 62341600GR
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type GR, Steel, black oxide finish

    Clamp collar double-split steel C45 black oxide finished bore 16mm with bolts DIN 912 12.9 type GR PN: 62341600GR

     $20.55 Add to cart
  • Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type GA PN: 62399116GA
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type GA, Stainless

    Clamp collar single-split stainless steel 1.4305 bore 16mm with bolt DIN 912 A2-70 type GA PN: 62399116GA

     $27.35 Add to cart
  • Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type B1 PN: 62399416B1
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Stainless

    Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type B1 PN: 62399416B1

     $33.66 Add to cart
  • Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type B2 PN: 62399416B2
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type B1 and B2, Stainless

    Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type B2 PN: 62399416B2

     $35.34 Add to cart
  • Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type GR PN: 62399416GR
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Double-Split - Type GR, Stainless

    Clamp collar double-split stainless steel 1.4305 bore 16mm with bolts DIN 912 A2-70 type GR PN: 62399416GR

     $31.42 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top