Maedler North America

Menu
Surface
Material
Outer diameter [mm]
No. of teeth
Hub
Hardened
Bore [mm]
Module
Inner diameter [mm]
Length [mm]
Profile
Version
Tooth width [mm]
Bore diameter [mm]
Width [mm]
Belt width [mm]
Ratio
Thread size
Effective length [mm]
Bore H7 [mm]
Output speed [min 1]
Max. output torque [Nm]
Taper bushing (type)
Thread type
Power [kW]
Toothed length [mm]
Ratio total
Self closure
Motor size
Gearbox size
Thread size x Slope [mm]
Pitch x inner width (inch)
Thickness [mm]
Profile type [mm]
Adjustable range [mm]
Shaft diameter [mm]
Handle diameter [mm]
Pitch [mm]
Inner thread size [mm]
Spline width [mm]
No. of splines
Ratio actual

89

  • Plate wheel KRL without hub 06 B-1 3/8x7/32" 19 teeth material steel PN: 10121900
    Plate wheels KRL, Pitch 3/8 × 7/32", ISO 06 B-1Plate wheels KRL, Steel, pre-boredSingle-SprocketsSprocketsSprockets, Chains, Accessories

    Plate wheel KRL without hub 06 B-1 3/8×7/32″ 19 teeth material steel PN: 10121900

     $5.89 Add to cart
  • Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides PN: 10800302
    Connecting Links K1, Double-SidedConnecting Links with Spring Clip, with Bent AttachmentsRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides PN: 10800302

     $7.81 Add to cart
  • Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides stainless steel 1.4301 PN: 10899302
    Connecting Links K1, Double-Sided, StainlessConnecting Links with Spring Clip, with Bent AttachmentsRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain connecting link type 11 / E with bent attachments 16 B-1-K1 attachments slim version on both sides stainless steel 1.4301 PN: 10899302

     $23.74 Add to cart
  • Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on both sides stainless steel 1.4301 PN: 10899332
    Connecting Links M1, 2-sided, StainlessConnecting links with spring clip, with Straight AttachmentsRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain connecting link type 11 / E with straight attachments 16 B-1-M1 attachments slim version on both sides stainless steel 1.4301 PN: 10899332

     $22.36 Add to cart
  • Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on one side stainless steel 1.4301 PN: 10899351
    Connecting Links M2, 1-sided, StainlessConnecting links with spring clip, with Straight AttachmentsRoller Chains and Accessories DIN ISO 606 (ex DIN 8187)Sprockets, Chains, Accessories

    Chain connecting link type 11 / E with straight attachments 16 B-1-M2 attachments wide version on one side stainless steel 1.4301 PN: 10899351

     $19.40 Add to cart
  • Loctite 518 Medium strength standard flange sealant content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073402
    Loctite® 518 - Medium Strength Standard Flange SealantLoctite® ProductsLoctite® Sealants and Sealant RemoversX-TRA Adhesives, Sealants and Lubrication

    Loctite 518 Medium strength standard flange sealant content 50 ml (Actual safety data sheet on the internet in the section Downloads) PN: 14073402

     $61.75 Add to cart
  • Timing belt pulley HTD 5M material steel 18 teeth for belt width 15mm PN: 17231800
    Pulleys HTD 5M, Belt Width 15 mmPulleys Profile HTDTiming Belts and Pulleys

    Timing belt pulley HTD 5M material steel 18 teeth for belt width 15mm PN: 17231800

     $12.34 Add to cart
  • Spur gear made of steel 11SMn30+C with hub module 0.7 72 teeth tooth width 5mm outside diameter 51.8mm PN: 21207200
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 0.7Spur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel 11SMn30+C with hub module 0.7 72 teeth tooth width 5mm outside diameter 51.8mm PN: 21207200

     $27.83 Add to cart
  • Spur gear made of steel C45 with hub module 1 33 teeth tooth width 10mm outside diameter 35mm PN: 21403300
    Spur Gears, Steel 11SMnPb30 / C45, Milled Teeth, Module 0.5 to 10Spur Gears, Steel, Module 1Spur Gears, Steel, Module 1, Tooth Width 10 mm, With HubSpur Gears, Straight Tooth SystemSpur Gears, Toothed Racks, Internal Gears, Ratchet Wheels

    Spur gear made of steel C45 with hub module 1 33 teeth tooth width 10mm outside diameter 35mm PN: 21403300

     $21.96 Add to cart
  • Locking assembly SIG stainless steel 1.4301 bore 25mm PN: 61512500
    Locking Assemblies SIG, Stainless, in New SizesLocking Assemblies, Clamping Bushes, Taper Bushes

    Locking assembly SIG stainless steel 1.4301 bore 25mm PN: 61512500

     $84.88 Add to cart
  • Bolt 5/8" x 1 3/4"" for Taper bush 4030 and 4040 PN: 62251299
    Locking Assemblies, Clamping Bushes, Taper BushesSpare Screws for Taper BushesTaper Bushes

    Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040 PN: 62251299

     $5.02 Add to cart
  • Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type B1 PN: 62311800B1
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, black oxided

    Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type B1 PN: 62311800B1

     $15.58 Add to cart
  • Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type B2 PN: 62311800B2
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Steel, black oxided

    Clamp collar single-split steel C45 black oxide finished bore 18mm with bolt DIN 912 12.9 type B2 PN: 62311800B2

     $16.28 Add to cart
  • Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type B1 PN: 62399118B1
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Stainless

    Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type B1 PN: 62399118B1

     $32.11 Add to cart
  • Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type B2 PN: 62399118B2
    Clamp Collars, Shaft Collars (Adjusting Rings)Fastening ElementsShaft Collars, Clamp Collars, Single-Split - Type B1 and B2, Stainless

    Clamp collar single-split stainless steel 1.4305 bore 18mm with bolt DIN 912 A2-70 type B2 PN: 62399118B2

     $33.70 Add to cart
  • SKF self aligning ball bearing 2203 E-2RS1TN9 double row inner diameter 17mm outer diameter 40mm width 16mm sealed PN: 64773034
    Ball Bearings / Roller BearingsBearings, Bushes, SealsSelf Aligning Ball Bearings SKF®, Double Row

    SKF self aligning ball bearing 2203 E-2RS1TN9 double row inner diameter 17mm outer diameter 40mm width 16mm sealed PN: 64773034

     $70.92 Add to cart
  • Adjustable clamping lever 120 version G with external thread M8 x 40mm long lever length L2 = 62mm PN: 66575840
    Adjustable Clamping LeversAdjustable Clamping Levers 120 Version G with External ThreadParts for Operating

    Adjustable clamping lever 120 version G with external thread M8 x 40mm long lever length L2 = 62mm PN: 66575840

     $17.40 Add to cart
  • Cabint U handle 425 CR length 88mm material steel chrome plated PN: 66661200
    Cabinet “U” Handles 425 from Steel, Chrome PlatedCabinet U Handles, Arch HandlesParts for Operating

    Cabint U handle 425 CR length 88mm material steel chrome plated PN: 66661200

     $11.26 Add to cart
  • Hinge M237 Zinc die casting, type A, 50x50mm PN: 67700303
    Fastening ElementsHingesHinges M237, Zinc Die Cast

    Hinge M237 Zinc die casting, type A, 50x50mm PN: 67700303

     $10.13 Add to cart
  • Ball head precision levelling adjuster MN 686.8 15-6.6 PN: 68680500
    Ball Head Precision Adjusters MN 686.8, Zinc-platedMachine Mounts, Rubber-Buffers, Dampers

    Ball head precision levelling adjuster MN 686.8 15-6.6 PN: 68680500

     $65.39 Add to cart

Please enter your email address to receive your cart as a PDF.
Scroll to Top