| Part number (SKU) | 64470150 |
| Material | Steel (ASTM A36) |
| Surface | Black oxide finish |
| Type | KARA-50** |
| Inner diameter [D1 H7] | 50 [mm] |
| Hole circle diameter [D3 +/-0,1] | 68 / 65 [mm] |
| Length [L] | 125 [mm] |
| Width [B] | 30 [mm] |
| Thread size x length [M x l] | M 6/M 8 x 12 [mm] |
| Weight | – [kg] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 1 kg |
|---|---|
| Dimensions | 30 × 125 × 85 cm |
| Material | |
| Surface | |
| Type | |
| Inner diameter | |
| Hole circle diameter | |
| Length | |
| Width | |
| Thread size x length | |
| Weight |
Cardan adapter KARA-50 bore D1=50mm D3=68 and 65mm thread=M6 and M8 x 15 PN: 64470150
Material: Steel, black oxide finish. Strength min. 350 N/mm2.
Cardan adapter for cardanical mounting of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter.
* With 2 different drilling patterns on front and back side.
** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 12.
*** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 20.
The drill pattern on the backside is 30° displaced to the frontside.
$240.50
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $240.50 |
| 10 - 24 | 1.67 % | $236.49 |
| 25 - 49 | 3.33 % | $232.48 |
| 50+ | 11.23 % | $213.48 |
