| Part number (SKU) | 64867500 |
| Material | Steel (1045) |
| Surface | Blank |
| Profile type | KN 16 x 20 [mm] |
| Version | 1 |
| Outer diameter [A] | 40 [mm] |
| Inner diameter [d] | 16 [mm] |
| Length [L] | 15 [mm] |
| Screw (DIN 912) | M 6 x 16 |
| Wrench size of nut [sw] | – [mm] |
| Weight | 110 [g] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 0.112 kg |
|---|---|
| Dimensions | 40 × 40 × 15 cm |
| Material | |
| Surface | |
| Profile type | |
| Version | |
| Outer diameter | |
| Inner diameter | |
| Length | |
| Screw (DIN 912) | |
| Wrench size of nut | |
| Weight |
Clamp collar single split steel C45 with profile DIN ISO 14 KN 16×20 PN: 64867500
Material: Steel C45, screw strength 12.9, zinc-plated.
Single-split clamp collars, as end-stops on spline shafts.
These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust.
Version 1: The thread of the screw DIN 912 is covered with a layer of nylon.
Version 2: with additional nut, for adjusting the inner diameter and as lock nut.
Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.
$31.80
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $31.80 |
| 10 - 24 | 4.97 % | $30.22 |
| 25+ | 7.99 % | $29.26 |
You may also like…
-
Clamp Collars for Spline Shafts - DIN ISO 14, AluminiumSplined Shafts and Toothed Shafts and Hubsclamp collar single split aluminium with profile DIN ISO 14 KN 16×20 PN: 64862500
$31.42 Add to cart
