| Part number (SKU) | 61573800 |
| Material | Steel |
| Type | BAR-QPQ |
| Design (shape) | Cylindrical with several screws |
| Self-centering | Yes |
| Surface | QPQ-coated |
| Inner diameter [d] | 38 [mm] |
| Outer diameter [D] | 65 [mm] |
| Length [L] | 31 [mm] |
| Transmissible torque [T] | 880 [Nm] |
| Admissible axial force [Fax] | 47 [kN] |
| shaft surface pressure [PW] | 157 [N/mm2] |
| hub surface pressure [PN ] | 92 [N/mm2] |
| No. of bolts (pcs) | 8 |
| Thread size | M 6 x 30 |
| Tightening torque fastening screws [TA] | 17 [Nm] |
| Weight | 0.430 [kg] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 0.43 kg |
|---|---|
| Dimensions | 65 × 65 × 37 cm |
| Material | |
| Type | |
| Design (shape) | |
| Self-centering | |
| Surface | |
| Inner diameter | |
| Outer diameter | |
| Length | |
| Transmissible torque | |
| Admissible axial force | |
| shaft surface pressure | |
| hub surface pressure | |
| No. of bolts (pcs) | |
| Thread size | |
| Weight |
Locking assembly BAR bore 38mm QPQ-coated PN: 61573800
Material: Steel.
– For fixing a hub on a shaft. – QPQ coated: High corrosion resistance,
improved fatigue strength, primarily food safe (further information see
below). – For medium torques. – Self-centering. – Slight axial offset
possible during assembly.
Fit, Surface: Due to the special design of the BAR clamping set
even rough fits can be bridged with excellent self centering capacity.
Shaft and hub up to Quality h8/H8. Surface finish for shaft and hub Rz
< 12 µm.
QPQ Surface Properties: Very good corrosion resistance, better
than hard chrome or chem. nickel. Corrosion resistance in the salt spray
test SS CASS in accordance with DIN 50021. Layer thickness of 10 – 25 µm
possible. For medium operational demands we recommend a layer thickness
of 15 µm at a 90 minute treatment. Only very small changes in dimensions
(only 5 µm), as the surface modification is achieved through diffusion
and not application. Surface hardness same as clamping set material =
350 HV. Improved wear resistance, no fretting corrosion, no cold shut.
Increased endurance strength, sometimes up to 100% higher. Is completely
safe to use with food as long as there is no contact with any acidic
substances with a pH-value of = 4.
$81.82
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $81.82 |
| 10 - 24 | 2.98 % | $79.38 |
| 25+ | 6.23 % | $76.72 |
You may also like…
-
Locking Assemblies BAR, boreholes 5 - 100 mmLocking Assemblies, Clamping Bushes, Taper BushesLocking assembly BAR bore 38mm PN: 61543800
$90.03 Add to cart
