| Part number (SKU) | 61599565 |
| Material | Stainless steel (316) |
| Type | COM-A Stainless |
| Design (shape) | Cylindrical with several screws |
| Self-centering | No |
| Surface | Blank |
| Inner diameter [d] | 65 [mm] |
| Outer diameter [D] | 95 [mm] |
| Length [L] | 24 [mm] |
| Transmissible torque [T] | 1800 [Nm] |
| Admissible axial force [Fax] | 48 [kN] |
| shaft surface pressure [PW] | 98 [N/mm2] |
| hub surface pressure [PN ] | 66 [N/mm2] |
| Bolts (No. x Size) | 16 x M8 |
| Tightening torque fastening screws [TA] | 18 [Nm] |
| Weight | 0.72 [kg] |
If you need a rework or a custom-made-product please contact us directly with your inquiry.
The supplied 3D models, pictures and technical drawings are made with reasonable care.Nevertheless liability is excluded for the accuracy and correctness of this data.
| Weight | 0.72 kg |
|---|---|
| Dimensions | 95 × 95 × 32 cm |
| Material | |
| Type | |
| Design (shape) | |
| Self-centering | |
| Surface | |
| Inner diameter | |
| Outer diameter | |
| Length | |
| Transmissible torque | |
| Admissible axial force | |
| shaft surface pressure | |
| hub surface pressure | |
| Bolts (No. x Size) | |
| Weight |
Locking assembly COM-A stainless steel 1.4401 bore 65mm size 65-95 PN: 61599565
Material: Stainless steel 1.4401 (AISI 316).
Clamping bush for lower torques; not self-centering.
Fit: Shaft h8, Hub H8. Surface roughness Rz max. 16 µm.
Mounting: Slightly oil the clamping set before mounting, do not
use molibdenum disulphide or grease. Tighten the screws evenly and
crosswise in several steps. Demounting: Due to the cone angle,
the clamping set is usually released once all screws have been fully
unfastened. There a three large threads cut into the front ring, which
serve to remove this ring.
Ts – Fastening Torque
T – Transmittable Torque
F – Transmittable Axial Force
P – Surface Pressure onto Hub
$163.79
Ships within 1-2 weeks
| Quantity | Discount (%) | Price |
|---|---|---|
| 1 - 9 | — | $163.79 |
| 10 - 24 | 4.22 % | $156.88 |
| 25+ | 5.84 % | $154.22 |
